The Ford Edge 2016 has two air filters you may service: the engine air filter located in the engine bay and the cabin air filter tucked behind the glove box. Both are designed for straightforward replacement by a DIYer with basic tools.
Understanding where each filter sits helps you perform routine maintenance, diagnose performance issues, and keep interior air clean. This guide outlines the exact locations and steps to access, inspect, and replace both filters on the 2016 Edge.
Engine air filter location
Use these steps to locate and replace the engine air filter if you notice reduced performance or a dirty look in the intake area. The engine air filter sits in a rectangular black plastic housing in the engine bay, typically on the passenger side, connected to the intake tube.
- Open the hood and locate the engine air filter housing, a rectangular black plastic box on the passenger side of the engine bay where the intake tube enters the box.
- Release the clips or screws that secure the top of the housing. Depending on trim, you may need to press latches or remove a metal retaining band.
- Lift the cover and remove the old filter. Note the orientation of the filter and any arrows indicating airflow direction.
- Inspect the filter for dirt, dust, leaves, or oil buildup. If it looks dirty or clogged, replace it with a new filter of the correct size for your engine configuration.
- Insert the new filter, ensuring the orientation arrows point toward the engine. Refit the housing cover and secure the clips or screws.
- Close the hood and run the engine for a few seconds to ensure the intake is sealed and there are no abnormal noises.
Replacing the engine air filter is a routine maintenance task that helps maintain proper engine breathing and efficiency when done on schedule.
Cabin air filter location
Use these steps to access and replace the cabin air filter behind the glove box. The cabin filter protects interior air quality by filtering dust, pollen, and other particulates as air passes through the HVAC system.
- Turn off the vehicle and remove any items from the glove box.
- Gently open the glove box and release its side stops or damper so the box can drop down or swing down to expose the area behind it.
- Locate and remove the cabin air filter housing cover behind the glove box.
- Take out the old cabin air filter and check its orientation. Note which side faces forward based on the housing markings.
- Install the new filter with the airflow arrows pointing toward the rear of the vehicle (or as indicated on the filter/frame).
- Reattach the filter housing cover, then return the glove box to its original position and close it securely.
Replacing the cabin air filter is a straightforward maintenance task that can improve HVAC performance and cabin air quality, typically performed during regular service intervals or when occupants notice reduced airflow or odors.
Summary
In a 2016 Ford Edge, the engine air filter is located in a rectangular housing in the engine bay on the passenger side, while the cabin air filter sits behind the glove box on the same side. Both filters are designed for easy DIY replacement with basic tools, and performing periodic changes helps protect engine performance and interior air quality. Regular checks can also reveal whether there is debris or a clogged filter that needs attention.