The 2015 Charger SE uses 5W-20 synthetic motor oil (full synthetic recommended).
The Charger SE for the 2015 model year is typically equipped with the 3.6-liter Pentastar V6. The oil specification is set by Chrysler/MS-6395 standards, and you should use a 5W-20 viscosity that meets API SN (or newer) and ILSAC GF-5 (or newer). The engine’s oil capacity is about 5 quarts with a filter, and using the correct oil helps maintain performance and longevity. Always refer to the owner’s manual or the vehicle’s oil-life monitor for the precise interval based on your driving conditions.
Recommended oil type and specifications
To keep the 2015 Charger SE running smoothly, adhere to the official oil specification and related standards. The following details outline the essential requirements you should look for when purchasing oil.
- Viscosity: 5W-20
- Oil type: Synthetic motor oil (full synthetic recommended)
- Standards: API SN (or newer) and ILSAC GF-5 (or newer)
- Chrysler specification: MS-6395
- Oil capacity: Approximately 5 quarts with filter
Before reviewing the list, note that these items cover the core oil requirements for the 3.6L Pentastar engine most commonly found in the 2015 Charger SE.
In short, choose a 5W-20 synthetic oil that meets MS-6395 and API/SN or newer, suitable for the 3.6L Pentastar engine in the 2015 Charger SE.
Engine options and important caveats
The information above applies to the 3.6-liter Pentastar V6 most commonly paired with the Charger SE. If your vehicle features a different engine (for example, a 5.7-liter Hemi in higher trims), always check the owner’s manual for the exact viscosity, standard, and capacity, as those specs can differ by engine and climate.
How to verify the correct oil for your car
Use your owner’s manual as the primary source of truth, and consult the vehicle’s oil-life monitor if equipped. If you’re unsure, you can also have a service advisor confirm that the oil you choose meets API SN or newer, ILSAC GF-5 or newer, and Chrysler MS-6395 for the 3.6L engine variant in your 2015 Charger SE.
Maintenance tips and intervals
For modern engines like the 3.6L Pentastar, many owners rely on an oil-life monitor to tailor change intervals to actual driving. In general, synthetic 5W-20 oil is compatible with typical intervals around 5,000–7,500 miles under normal conditions, but severe driving (extensive short trips, heavy towing, or extreme temperatures) may shorten that interval. Always follow the monitor or the manual for precise timing.
Summary
The 2015 Charger SE is designed to run on 5W-20 synthetic motor oil that meets API SN or newer, ILSAC GF-5 or newer, and Chrysler MS-6395 standards. The approximate oil capacity is about 5 quarts with a filter. Use a full synthetic 5W-20 oil from a reputable brand, and follow the vehicle’s oil-life monitor or the owner’s manual for the recommended change interval. If in doubt, consult a trusted technician or the dealership to confirm the exact specification for your VIN.