Approximately 5.7 quarts (5.4 liters) of engine oil with a new filter is required for the 2018 Ford Escape powered by the 2.0-liter EcoBoost engine.
That figure comes from Ford's official specifications for the 2.0 L EcoBoost in the Escape and represents the standard fill for a complete oil change when a new filter is installed. Actual amounts can vary slightly by production run or if you’re using a different filter size, so always confirm with the owner's manual or a Ford dealership for your VIN.
Official oil capacity for the 2.0L EcoBoost in the 2018 Escape
The Ford Owner's Manual lists the 2.0-liter EcoBoost engine’s oil capacity as 5.7 quarts (5.4 liters) with a new oil filter. This is the typical amount needed to refill the engine after draining and replacing the filter during an oil change.
Capacity with the oil filter installed
With a fresh filter installed, plan to add about 5.7 quarts of oil so the level registers on the dipstick after circulation and settling.
Notes on variations and confirmation
Some sources report a range around 5.5–5.8 quarts due to minor variations in filters or model production. The official specification for the 2018 Escape 2.0L EcoBoost remains 5.7 quarts with filter. For absolute certainty, consult the owner's manual or your local Ford dealer with your vehicle's VIN.
Maintenance guidance and best practices
Use the oil viscosity and type recommended by Ford for your climate and engine (the EcoBoost engines commonly use 5W-20 synthetic). After changing the oil, run the engine briefly, turn off, allow the oil to settle, and recheck with the dipstick, topping up to the full mark if needed.
Summary
The 2018 Escape with the 2.0 L EcoBoost engine requires about 5.7 quarts (5.4 liters) of engine oil with a new filter for a standard oil change. Always verify the exact capacity for your VIN in the owner's manual and use the recommended viscosity to ensure proper lubrication and performance.
What was the worst year for the Ford Escape?
2014
The third generation represents the Ford Escape's worst reliability period. The 2013-2014 models are particularly problematic, with the 2014 ranked as the worst overall Escape year by CarComplaints.com. Engine coolant intrusion, transmission failures, and fuel injector defects create serious safety and financial risks.
Can I put 5W-30 in my Ford Escape?
Here are the recommended Ford Escape oil types for your vehicle: Motorcraft SAE 0W-20 (for Hybrid models) Motorcraft SAE 5W-20. Motorcraft SAE 5W-30.
What oil does Ford recommend for a 2.0 EcoBoost?
Example: The image below shows that a 2021 to 2024 2.0L EB Bronco Sport vehicle takes SAE 5W-30 Motorcraft oil, has a 5.5-quart capacity, and uses a Motorcraft FL910S oil filter.
What kind of oil does a Ford Escape 2.0 EcoBoost take?
SAE 5W-30 synthetic blend
2.0L EcoBoost Engine: Motorcraft SAE 5W-30 synthetic blend oil is recommended.