The front wipers on a 2014 Kia Sorento are typically 26 inches on the driver side and 18 inches on the passenger side, with an 11-inch rear blade. This article explains the standard measurements, how to verify them on your SUV, and how to replace worn blades.
Front Wiper Blades: Sizes and Fit
The Sorento’s front blades come in two lengths to match the driver’s and passenger’s view. Using the correct sizes ensures full clearance and proper contact with the windshield.
Variations by trim and aftermarket options
While 26" and 18" are typical for many 2014 Sorento models, some trims or aftermarket replacements may use slightly different lengths. Always confirm by checking the sticker on the driver's door jamb or the owner's manual, and bring the old blade to the retailer if in doubt.
- Driver-side blade length: 26 inches
- Passenger-side blade length: 18 inches
Conclusion: These are the standard front blade lengths for the 2014 Sorento; confirm with your vehicle’s documentation or by measuring the blade if you have a nonstandard setup.
Rear Wiper Blade: Size and Replacement
The Sorento’s rear window uses a single, shorter blade designed to clear the rear pane while fitting within the hatch area.
- Rear blade length: 11 inches
Conclusion: An 11-inch rear blade is typical for the 2014 Sorento. Verify this if you are replacing or purchasing online, as some markets or aftermarket options may differ slightly.
How to Verify Your Wiper Sizes
If you want to double-check before buying blades, use these quick methods to confirm the correct lengths for your specific Sorento.
- Open the hood and inspect the blade attachment at the wiper arm to identify the style (hook, pin, etc.).
- Look for the recommended sizes on the sticker inside the driver's door jamb or in the owner's manual.
- Measure the blade length from tip to tip when the blade is removed or in a relaxed, extended position.
- Cross-check your Sorento’s year and trim with a parts retailer or the official Kia parts catalog online to ensure compatibility.
Conclusion: Verifying the exact sizes before purchase helps avoid returns and guarantees proper fitment and performance.
Replacing Wiper Blades: Quick Steps
Replacing blades is a common maintenance task that can improve visibility dramatically. The exact release mechanism varies by brand, but the basic steps are consistent.
- Lift the wiper arm away from the windshield until it remains upright and secure.
- Release the old blade by pressing the release tab or sliding the blade out of the hook assembly, depending on the design.
- Attach the new blade by aligning it with the arm’s attachment and locking it into place.
- Lower the arm back onto the windshield and gently wipe to ensure a secure fit and proper contact.
Conclusion: Replacing blades is quick and simple, typically taking just a few minutes per side, and it improves visibility in rain and grime.
Summary
For a 2014 Kia Sorento, plan for front blades of 26 inches on the driver side and 18 inches on the passenger side, plus an 11-inch rear blade. Always verify by checking the door jamb sticker or the owner's manual, especially if you’re dealing with a nonstandard trim or aftermarket configurations. When in doubt, bring the old blade to a parts retailer to confirm compatibility.