Use 0W-20 viscosity engine oil that meets ILSAC GF-5/API standards; the 2.4-liter engine in the 2014 CR-V holds about 4.5 quarts with the filter.
The official Honda service manual calls for 0W-20 for normal operation, and notes that oil can be synthetic or conventional depending on availability and preference. Always verify your exact trim against the owner's manual, as specifications can vary by market and model year.
Oil type and specifications
Key factors to match with your CR-V
- Viscosity: 0W-20 is the recommended grade for the 2014 CR-V’s 2.4L engine.
- Standards: Oil should meet API GF-5 (or newer) and ILSAC standards.
- Oil type: Synthetic blend or full synthetic oils are acceptable options.
- Capacity: Approximately 4.4–4.5 quarts (with filter) for a typical oil change.
Sticking to these specifications helps ensure proper lubrication, fuel efficiency, and engine longevity. Always consult the owner's manual for your exact model and regional variant.
Oil capacity and service intervals
Before listing the practical numbers and guidance for changing and maintaining oil, consider the following:
- Oil capacity (with filter): About 4.5 quarts (4.3 L); exact capacity may vary slightly by engine code and whether the filter is replaced.
- Recommended change interval: Roughly every 5,000 miles with conventional oil, and up to 7,500 miles with full synthetic oil; severe driving conditions may require more frequent changes. Always follow the owner's manual for your conditions.
- Filter and drain plug: Replace the oil filter with every change and use a new drain plug crush washer if applicable.
- Measuring and topping up: Check the oil level with the engine cold and on a level surface, using the dipstick; add oil to bring the level to the full mark if needed.
Regular maintenance and accurate oil level checks are essential for keeping the engine performing as designed and protecting long-term reliability.
Summary
For a 2014 Honda CR-V, use 0W-20 oil that meets API GF-5/ILSAC standards, with a typical capacity of about 4.5 quarts (with filter). You can choose a synthetic blend or full synthetic, and follow a maintenance interval of about 5,000 miles for conventional oil or up to 7,500 miles for synthetic, adjusting for driving conditions. Always refer to the owner’s manual for your exact trim and region, and replace the oil filter with each change while properly topping up and rechecking the level.