The typical replacement blade sizes for the 2012 Honda Accord are 26 inches on the driver’s side and 19 inches on the passenger’s side for the four-door sedan. Coupe models commonly use a 26-inch driver blade with a shorter passenger blade, usually 17 or 18 inches, depending on trim and market. Always verify with your owner’s manual or current blades.
Sedan (four-door) wiper sizes
For most 2012 Accord sedans, replacement blades come in a two-blade setup designed to cover the driver and passenger sides of the windshield efficiently.
- Driver-side blade: 26 inches
- Passenger-side blade: 19 inches
Size variations can occur based on trim level, aftermarket brands, or regional spec, so it’s best to confirm before purchasing.
Coupe wiper sizes
Honda Accord coupes are often equipped with a different passenger-side blade length due to the coupe’s smaller or differently shaped windshield. Common configurations report:
- Driver-side blade: 26 inches
- Passenger-side blade: 17 or 18 inches (check your vehicle or seller’s specs)
If you’re replacing wipers on a 2012 Accord coupe, verify the exact length on the existing blade or by consulting the owner’s manual or a parts retailer listing for your VIN.
How to verify the right size
To ensure you purchase the correct blades, you can:
- Check the owner’s manual’s wiper blade section for the recommended sizes.
- Measure the current blades from end to end, following the curve of the blade.
- Enter your vehicle’s year, make, model, and trim into an online parts catalog or retailer’s site to confirm the exact sizes for your VIN.
If in doubt, bring the old blades to the store or contact a dealer to confirm the exact lengths for your specific car configuration.
Installation and tips
When replacing, it is usually straightforward: release the old blades, attach the new blades following the directions, and test with a few passes to ensure full clearance and no streaking. Use high-quality blades designed for all-weather performance to extend life and maintain visibility in rain and snow.
Summary: For the 2012 Honda Accord, sedan models typically require 26-inch driver-side blades and 19-inch passenger-side blades, while coupes often use 26-inch driver blades and 17–18-inch passenger blades. Always verify based on your vehicle’s trim, region, and the current blades, using the owner’s manual or a trusted retailer catalog. Replacing blades with the correct sizes ensures clear visibility and safe driving in adverse conditions.