In most 2010 Infiniti models, the recommended engine oil is synthetic 5W-30. The exact specification can vary by engine and climate, so check your owner's manual or ask a dealer to confirm for your specific vehicle.
General guidance for the 2010 Infiniti lineup
The 2010 Infiniti family, including models like the G37, M37, FX35/FX50, and QX56, typically recommends a full synthetic 5W-30 oil that meets API SN and ILSAC GF-5 standards. Temperature and engine design can influence the precise requirement, so use this as your baseline and verify against your manual.
Engine-specific recommendations
3.7-liter V6 family (G37, M37, FX35)
For these engines, 5W-30 synthetic oil is the standard choice, with the oil meeting API SN and ILSAC GF-5 specifications. Infiniti generally favors Nissan/Infiniti Genuine Motor Oil or an equivalent synthetic that meets these standards.
- Viscosity: 5W-30 synthetic
- Standards: API SN and ILSAC GF-5 (or newer)
- Recommended oil: Full synthetic, suitable for Infiniti/Nissan specifications
Conclusion: 5W-30 synthetic is the norm for the V6 engines in the 2010 lineup; always confirm via the manual for your exact model and climate.
5.6-liter V8 (QX56)
The V8-equipped QX56 commonly uses the same baseline oil as the V6 models—5W-30 synthetic that meets API SN and ILSAC GF-5. Confirm any climate-specific notes in the manual or with a dealer.
- Viscosity: 5W-30 synthetic
- Standards: API SN and ILSAC GF-5 (or newer)
- Recommended oil: Full synthetic aligned with Infiniti/Nissan specifications
Conclusion: The V8s in the 2010 Infiniti lineup generally follow the same 5W-30 synthetic rule, but always verify for your vehicle and conditions.
Climate considerations
While 5W-30 is the standard recommendation, certain climates or driving conditions may warrant an alternative. In very cold environments, some owners and dealers may opt for 0W-30; in hot climates or high-load driving, a higher grade may be suggested by a technician. Always follow the manual or a professional’s guidance for your region.
- Cold climates: possible use of 0W-30 as an alternative, per manual/tech advice
- Hot climates or heavy-duty use: verify if any alternate viscosity is recommended
Concluding: The baseline remains 5W-30 synthetic for most 2010 Infiniti engines, with climate-based exceptions requiring manual verification.
How to verify the exact specification for your car
To ensure you’re using the correct oil for your exact vehicle and conditions, follow these steps:
- Consult the owner's manual’s Engine Oil section for the precise viscosity and certification required for your model and engine
- Check the oil filler cap or the under-hood label where the recommended grade is often printed
- Ask a certified Infiniti technician or your local dealer if you’re unsure, especially for climate-specific guidance
Conclusion: When in doubt, use a synthetic 5W-30 that meets API SN and ILSAC GF-5, preferably Infiniti/Nissan Genuine Motor Oil or an equivalent. This aligns with the majority of 2010 Infiniti engines, with confirmation from official sources for your exact configuration.
Summary
The standard answer for most 2010 Infiniti models is synthetic 5W-30 oil meeting API SN and ILSAC GF-5 standards. Engines, climates, and regional guidelines can introduce small variations, so always verify with the owner's manual or a dealer. Using the recommended oil helps protect engine performance and longevity.
What oil does a 2010 Infiniti take?
AMSOIL 5W-30 100% Synthetic High-Mileage Motor Oil.
Does Infiniti take 5W-30?
What is the Recommended Oil for the INFINITI QX60? The INFINITI QX60 recommended oil varies by model year. For 2023 vehicles and newer, the automaker suggests 0W-20 full synthetic oil, while older models will likely need 5W-30 full synthetic oil.
What oil does Infiniti recommend?
The recommended Infiniti engine oil type for many of these models is full synthetic with a viscosity grade such as 0W-20 or 5W-30. Always check your owner's manual for the exact specifications for your vehicle. Using the right oil is not just about what the engine needs. It's also about protecting your investment.
Is 5W-30 good for older engines?
5W30 offers better high-temperature protection. It's great for towing, highway driving, or older engines, especially for drivers in Frandor and Lansing who use their vehicles for more than just errands. 5W20 is thinner and generally suited for newer engines that prioritize efficiency.