The tire pressure light on the 2022 Honda CR-V resets most reliably by inflating all tires to the manufacturer’s recommended cold pressures and allowing the system to relearn, which can happen automatically with a drive or via a dedicated reset button on some trims. If the light stays on after correcting pressures and attempting a relearn, there may be a sensor fault or tire issue that needs inspection.
The CR-V uses a Tire Pressure Monitoring System (TPMS) that monitors each wheel’s air pressure and alerts you if a tire is underinflated or if a sensor fault is detected. While many owners will get a reset by correcting pressures and driving, some trims offer a manual TPMS reset option. The reset control, when present, is typically located under the dash near the driver's side, though exact placement can vary by trim and market. If the light persists after inflation and driving, a tire shop or Honda dealer can diagnose sensor health and perform any necessary reprogramming.
What triggers the TPMS light and what to know
Before attempting a reset, it helps to understand why the TPMS light may come on:
- Low tire pressure in one or more tires, including slow leaks or seasonal changes.
- A recent tire rotation or tire position change that requires a relearn of the sensors.
- A damaged TPMS sensor in a wheel or a weak battery in a sensor.
- Using a spare tire that isn’t equipped with a TPMS sensor (some spares lack sensors).
- Tire or wheel repairs and replacements that affect sensor accuracy and calibration.
In most cases, correcting the tire pressures and driving for a short period will clear the light after a relearn. If it remains on, inspect tires for leaks or damage and consider professional sensor diagnostics if needed.
Reset procedure
Follow these steps to reset the TPMS on a 2022 CR-V. Steps can vary by trim, so check the owner’s manual if you’re unsure.
- Confirm all four tires (and the spare, if it has a TPMS sensor) are inflated to the recommended cold pressures listed on the driver’s door jamb sticker.
- With the ignition on and the engine off, drive your CR-V at a steady highway speed (about 50 mph / 80 km/h) for around 10 minutes to allow the sensors to relearn after inflation.
- If your model has a dedicated TPMS reset button, locate it under the dash on the left side of the steering column near the hood release (locations can vary). Press and hold the button until the TPMS indicator light blinks or confirms reset, then release.
- After performing the reset (or if your model lacks a reset button), drive normally for another 10–20 minutes to complete the relearn process. The warning light should turn off if the system has relearned successfully.
If the warning light remains on after these steps, there may be a faulty sensor, a slow tire leak, or another issue requiring service. A Honda dealer or qualified tire shop can diagnose TPMS sensor faults and reprogram the system if needed.
Trim differences and caveats
Some 2022 CR-V trims rely more on automatic relearn and may not require a manual reset. The exact location of the TPMS reset button—and whether one exists at all—varies by trim and market. Always refer to the owner’s manual for your vehicle’s precise procedure.
Safety and maintenance tips
Maintaining correct tire pressure is essential for safety, fuel efficiency, and tire longevity. Check tire pressures when tires are cold, rotate tires as scheduled, and inspect for punctures or sensor damage if the TPMS warning appears.
Summary
Resetting the CR-V’s tire pressure light generally involves inflating all tires to the recommended cold pressures and allowing the TPMS to relearn, either automatically through driving or via a dedicated reset button if your trim supports it. If the light persists after following these steps, there may be a sensor fault or tire issue that warrants professional service.