Front wiper sizes: driver-side 24 inches, passenger-side 19 inches; rear wiper blade 11 inches. This article explains those sizes and how to confirm them for your specific vehicle.
Front wiper blades
The 2015 Trax typically uses two different lengths on the front due to the design of the windshield and wiper arms. Below are the standard sizes you’ll want when replacing both front blades.
- Driver's side: 24 inches
- Passenger's side: 19 inches
These two lengths cover the full front windshield on most 2015 Trax models. If your vehicle shows different wear patterns or you’ve installed aftermarket blades, verify fit before use.
Rear wiper blade
The Trax’s rear hatch wiper uses a single blade. The typical size for the rear blade is 11 inches.
- Rear: 11 inches
The rear blade is a single-piece replacement and is sized to fit the hatch’s wiper arm without adapters. If your vehicle has a different rear wiper setup, double-check the packaging or the owner's manual.
How to verify and install
To ensure you’re buying the correct blades, you can:
- Check the owner’s manual for the exact blade sizes for your trim and region.
- Measure the existing blades from end to end to confirm lengths before purchasing new ones.
- Ask a parts associate or use your vehicle’s VIN to cross-reference compatible blade sizes at auto parts stores.
Using the right sizes ensures optimal contact with the windshield, prevents streaking, and avoids blade-to-housing interference during operation.
Summary
For a 2015 Chevrolet Trax, you should typically install 24-inch driver-side and 19-inch passenger-side front blades, plus an 11-inch rear blade. Always verify with your manual or a trusted source if you are in a different market or have a special trim, and measure your current blades to confirm fit before purchase.