The official tire pressure specification for a 2016 Honda Civic is printed on the driver’s door jamb placard and is typically around 33 psi for the main tires when cold. Always confirm the exact numbers for your trim and wheel size on that placard; the spare tire is generally inflated to 60 psi.
Where to find the official spec
To ensure accuracy, rely on the official guidance shown on the driver’s door jamb placard. This placard lists the cold tire pressures for the front and rear tires and may vary by trim or wheel size. The owner’s manual also documents the recommended pressures and any model-specific notes.
Door jamb placard
The placard is located on the edge of the driver's door or door frame. It provides the recommended cold tire pressures (in psi or kPa) and may show different values for front and rear tires depending on the configuration. Use those numbers as the authority for inflating your tires.
How to check and adjust tire pressure
Before you adjust, make sure you’re measuring the tires when they are cold, and use a reliable tire pressure gauge. The following steps help ensure accuracy and safety.
- Check the current pressure in all four main tires with the vehicle cold (no driving for at least 3 hours or before starting a trip).
- Inflate or deflate each tire to the exact value shown on the door jamb placard.
- Recheck all four tires after adjustments to confirm consistent pressures.
- Periodically verify tire pressure at least once a month and before long trips, as temperature changes can affect readings.
Maintaining the correct tire pressure improves fuel efficiency, handling, and tire wear. If you have different wheel/tire sizes or aftermarket wheels, always use the placard’s numbers for your specific setup.
Spare tire pressure
The temporary spare (donut) on most 2016 Civics requires a higher pressure, typically around 60 psi, but you should verify the exact value on the spare tire itself or in the owner's manual. Do not exceed the spare’s recommended limit.
- Confirm 60 psi on the spare tire label or manual before installation.
- Only use the spare for short-term use and replace it with a proper tire as soon as possible.
Keeping the spare inflated to the proper level ensures you’re ready for emergencies without compromising safety.
Summary
The 2016 Honda Civic’s main tire pressures are generally around 33 psi cold, but the exact numbers can vary by trim and wheel size. Always rely on the driver’s door jamb placard for the precise values, check tires when cold, and adjust accordingly. Don’t forget the spare, which is typically inflated to 60 psi. Regular checks help maintain safety, fuel efficiency, and tire longevity.
What should the psi be for a 2016 Honda Civic?
Most Honda sedans, like the Civic and Accord, require 32 PSI (pounds per square inch).
Should my tires be 32 or 35 psi?
Most passenger cars' psi requirement will be between 30 to 35 psi, but several vehicles fall outside of that range and every vehicle will have specific requirements. Good tire air pressure ensures that tires wear evenly, provide a smooth ride, and increase fuel efficiency.
Is 37 psi too high for a Honda Civic?
The right tyre pressure for a Honda Civic is usually 33 PSI (230 kPa). Be sure to check your car's manual or the sticker inside the driver's door for the exact figures. Keeping your Honda Civic's tyres at the right pressure during summer affects safety, fuel use, and how long your tyres last.
What is the weakness of the Honda Civic?
Common Issues to Watch For in a Used Honda Civic
Suspension Wear. Rust Around Wheel Wells. CVT Transmission Hesitation. Worn Ignition Coils.