In short, S2000 fender weight depends on the material and whether you’re looking at OEM or aftermarket parts. Typical ranges are: aluminum OEM front fenders about 8–12 pounds each; carbon fiber or fiberglass aftermarket fenders around 3–9 pounds each; steel aftermarket fenders about 15–25 pounds each. Exact figures vary by year, model variant, and manufacturer.
What determines S2000 fender weight
The weight of S2000 fenders is influenced by material, construction method, and whether the panel is an OEM part or an aftermarket replacement. Aluminum panels are lighter than steel, while carbon fiber and fiberglass options aim to maximize weight savings for performance applications. Front fenders are typically lighter than full steel replacements, and rear fenders (where applicable) may differ in weight due to design.
Estimated weights by material
Below are common weight ranges you’ll encounter for front fenders on Honda S2000s. The figures reflect typical OEM and aftermarket variants used by enthusiasts and shops.
- Aluminum OEM front fenders: roughly 8–12 pounds (3.6–5.4 kg) per fender.
- Carbon fiber front fenders (aftermarket): roughly 3–6 pounds (1.4–2.7 kg) per fender.
- Fiberglass/FRP front fenders (aftermarket): roughly 6–9 pounds (2.7–4.1 kg) per fender.
- Steel aftermarket front fenders: roughly 15–25 pounds (6.8–11.3 kg) per fender.
These ranges are approximate and can vary by year, model variant (AP1 vs AP2), and the specific manufacturing process or reinforcements used by the maker. For a precise figure, consult the exact product specification from the vendor or weigh the actual panels you plan to install.
Additional considerations for S2000 fenders
Weight is only one factor. Installation hardware, inner liners, and mounting brackets can add or subtract from the total installed weight. Enthusiasts aiming for maximum weight savings often pair lightweight fenders with other components (hood, doors, trunk) made of similar materials, but always verify compatibility with the car’s structure and alignment.
Summary
The weight of S2000 fenders varies widely by material: OEM aluminum front fenders are typically 8–12 pounds each; carbon fiber or fiberglass aftermarket fenders are commonly 3–9 pounds each; steel aftermarket fenders are generally 15–25 pounds each. The exact numbers depend on year, model variant, and the manufacturer, so check product specs or weigh the panels you intend to use for precise planning.