The bolt pattern for the 2017 Honda Accord is 5x114.3 mm (five lugs on a 114.3 mm circle). This means wheels with five lug holes arranged around a 114.3 mm circle will fit, assuming other dimensions align.
Bolt pattern specifics
The following details define wheel compatibility for the 2017 Accord and help you determine what rims will mount properly and safely.
- Bolt pattern: 5x114.3 mm (five lug holes on a 114.3 mm circle).
- Center bore: 64.1 mm (hub-centric fit for proper alignment and reduced vibration).
- Lug nut size and seat: M12 x 1.5 thread with a 60-degree conical seat.
- Number of lugs: 5.
- Recommended lug nut torque: approximately 80 ft-lbs (108 Nm); verify against your specific trim and wheel type in the owner's manual or service specs.
These specifications influence wheel compatibility, including aftermarket options and the need for hub-centric rings if the center bore differs from the wheel hub.
Additional fitment considerations
While the 5x114.3 pattern is standard for many 2017 Accords, some trims or aftermarket wheels may have variations in bore size or seat type. Always confirm exact specifications with the wheel manufacturer or a tire shop before purchasing to ensure proper fitment and safety.
Why this matters for buyers and owners
Understanding the bolt pattern helps prevent ill-fitting wheels, vibration, or safety issues. If you’re swapping wheels across different cars or buying aftermarket rims, the 5x114.3 pattern is a common Honda standard from that era, but you must verify the center bore size, lug nut specifications, and torque requirements for your specific car and wheel choice.
Summary
The 2017 Honda Accord uses a 5x114.3 mm bolt pattern with a 64.1 mm center bore, five 12 mm studs, and lug nuts that typically require about 80 ft-lbs of torque. Always confirm exact specs for your model and the wheels you intend to use to ensure safe and proper fitment.