The GT86 takes 0W-20 synthetic engine oil, about 4.5 quarts (4.3 liters) including the filter.
The Toyota GT86, built in partnership with Subaru, uses a 2.0-liter FA20 engine. Official guidance for most markets calls for 0W-20 full-synthetic motor oil, with an approximate capacity of 4.5 quarts (4.3 liters) when changing the oil and filter. Always confirm the exact specification for your model year and region in the owner's manual or with a dealer, as regional variations can apply.
Oil specifications for the GT86
Key details you should know when selecting oil and planning a change:
- Oil grade: SAE 0W-20 full synthetic
- Oil capacity: 4.5 quarts (4.3 liters) including the oil filter
- Change interval: commonly around 10,000 miles (16,000 km) or 12 months, whichever comes first; verify with your manual for your specific car
Following these specifications helps ensure the FA20 engine runs efficiently while protecting wear-prone components across climates.
Why 0W-20 is used in the GT86
0W-20 is a low-viscosity synthetic oil that reduces friction and supports fuel efficiency without compromising protection at normal operating temperatures. It is the standard specification for the GT86 in most markets, though regional variations can occur. When in doubt, reference the owner's manual or consult a Toyota technician for your exact year and VIN.
Regional caveats and maintenance tips
Some markets have historically allowed minor variations or updates to viscosity recommendations over the model’s lifecycle. Always rely on the official manual for your year and region, and consider using dealership-approved oil brands to guarantee compatibility with the engine’s seals and computer controls.
Summary
Bottom line: the Toyota GT86 requires 0W-20 full-synthetic engine oil, about 4.5 quarts (4.3 liters) including the filter. Confirm your exact spec with the owner's manual or a dealer for your year and region, and adhere to the recommended service interval to maintain engine reliability.