The 2019 Honda Fit uses 0W-20 synthetic engine oil. Honda recommends full-synthetic 0W-20 for the 1.5-liter engine in this model, with API SN or newer certification.
In more detail, this viscosity and spec are intended to optimize fuel efficiency, cold-start performance, and engine protection under typical driving conditions. Always verify the exact requirements in the owner's manual or with a Honda dealership, and ensure any oil you buy meets API SN or newer and relevant ILSAC standards.
Approved oil type and viscosity
The official specification for the 2019 Fit calls for 0W-20 engine oil, preferably synthetic. This grade is chosen to balance protection, efficiency, and smooth operation for the 1.5-liter i-VTEC engine. Oil should meet API SN or newer standards, and many owners use Honda Genuine 0W-20 or equivalent from reputable brands.
Notes on compatibility and alternatives
Using a viscosity other than 0W-20 is not generally recommended for this model. If you have a special climate or vehicle condition, consult the owner’s manual or a dealer before deviating from the recommended 0W-20 synthetic oil. In practice, sticking with 0W-20 synthetic ensures the best results for reliability and efficiency.
Oil capacity and maintenance intervals
The 2019 Fit typically holds about three quarts (roughly 2.8–3.0 liters) of engine oil when performing a standard drain and replacement, plus a new filter. Oil change intervals are managed by the vehicle’s maintenance minder system and are commonly around 7,500 miles (12,000 kilometers) under normal driving. Severe service can shorten this interval, so follow the system prompts and manual guidance.
Practical buying tips
When shopping for oil, choose a full-synthetic 0W-20 that meets API SN or newer and ILSAC GF standards. Verify the exact specification in your owner's manual and use the correct quantity specified for your trim level. After refilling, check the dipstick to confirm the oil level is within the recommended range.
Summary
For a 2019 Honda Fit, the recommended oil is 0W-20 synthetic, API SN or newer. Use the correct quantity and follow the maintenance minder for oil-change intervals. Sticking to the 0W-20 grade helps preserve fuel efficiency and engine protection, with Honda or equivalent OEM-approved products ensuring compatibility.