0W-20 synthetic motor oil is recommended for the 2014 Honda Accord's engines (both the 2.4-liter four-cylinder and the 3.5-liter V6).
In 2014, the Accord offered two engines: a 2.4 L i-VTEC four-cylinder and a 3.5 L V6. Honda specifies 0W-20 oil with API SN or newer and ILSAC GF-5 (or newer) for both engines. You can use Honda Genuine 0W-20 or a high-quality synthetic blend if a full synthetic isn't available. Always consult the owner's manual or your dealer for exact capacity and drain intervals.
Engine options in the 2014 Accord
The 2014 Accord was available with two engines. Regardless of which engine you own, Honda's oil specification remains the same: 0W-20 synthetic oil meeting API SN or newer and ILSAC GF-5 or newer.
Does the oil specification differ by engine?
No. Both the 2.4-liter four-cylinder and the 3.5-liter V6 in the 2014 Accord use the same 0W-20 lubricant, and both should be filled with synthetic (or synthetic blend) oil that meets API SN and ILSAC GF-5 or newer.
Oil specification and grade
Before using or buying oil, keep these guidelines in mind:
- Viscosity: 0W-20
- Type: full synthetic or high-quality synthetic blend
- Standards: API SN or newer; ILSAC GF-5 or newer
- Brand: Honda Genuine 0W-20 or any brand that meets the above specs
- Reference: check the owner's manual or under-hood label for the exact requirement
Using the correct oil grade helps maintain fuel efficiency, proper lubrication, and engine protection. Using a different viscosity or non-synthetic oil can affect performance and warranty coverage.
Maintenance intervals and oil capacity
Below are general guidelines for maintenance intervals and oil capacity. Always follow the vehicle's Maintenance Minder and owner's manual for exact figures.
- Oil change interval: around 7,500 miles (12,000 km) with synthetic oil is common for normal driving; with conventional oil, more frequent changes are often recommended (roughly 3,750–5,000 miles depending on conditions)
- Oil capacity (approximate): 4-cylinder version about 4.0–4.5 quarts with filter; V6 version about 5.0–6.0 quarts with filter
- Oil filter: replace at each oil change
Regular oil changes using the recommended oil help extend engine life and maintain performance.
Where to verify official guidance
For precise specifications, refer to the 2014 Honda Accord owner's manual or consult a Honda dealer. The under-hood sticker on your vehicle also lists the required oil grade and capacity for your VIN.
Summary
The 2014 Honda Accord uses 0W-20 synthetic motor oil for both available engines (2.4L I4 and 3.5L V6), meeting API SN or newer and ILSAC GF-5 or newer standards. Use Honda Genuine 0W-20 or an equivalent that meets those specs, follow recommended change intervals, and check the owner's manual for exact capacities and requirements. In practice, sticking to the recommended oil ensures optimal lubrication, fuel efficiency, and engine reliability.