Replacing the front windshield wiper blades on a 2019 Honda Civic is a straightforward task: lift the blade away from the glass, release the old blade from the arm, attach a new blade, and lower the arm back onto the windshield. The typical front-blade sizes for this model are 26 inches on the driver’s side and 19 inches on the passenger’s side; a rear blade (if equipped) is usually around 11 inches.
This guide provides step-by-step instructions for front and rear wiper blade replacement, notes on blade sizes and adapters, and tips to ensure you install the blades securely and safely.
What you’ll need
Gather these items before you begin so the replacement is smooth and quick.
- New wiper blades in the correct sizes for your Civic (driver’s side and passenger’s side front blades; rear blade if your model has one).
- Blade adapters compatible with your wiper arm (many blades are multi-fit and work with most arms).
- Clean cloth or alcohol wipe to remove any residue from the blade or arm connection.
- A small amount of lubricant or silicone spray (optional) to help with installation and a quiet, smooth wipe action.
With the right blades and adapters, you’ll be able to complete the replacement cleanly and avoid skipping or chatter on the windshield.
Front wiper blades replacement
The following steps cover typical front blade replacement on a 2019 Civic. If your blades use a different connector, consult the blade packaging or the owner’s manual for the exact adapter.
- Park the car, turn off the ignition, and hold the wiper arms away from the windshield so you can access the blades safely. If needed, gently lift the driver’s side wiper first and then the passenger’s.
- Locate the release mechanism at the base of the blade where it attaches to the wiper arm. Commonly, you’ll find a small tab or lever in the blade housing; press or lift the tab to release the blade.
- Slide the old blade downward (or toward the arm, depending on the connector) to disengage it from the wiper arm. Stop once the blade is free from the hook or adaptor.
- Take the new blade and attach it to the wiper arm. Align the blade’s connector with the arm’s adaptor, then slide it into place until you hear or feel a click indicating a secure connection.
- Repeat the process for the other front blade. After both blades are installed, gently lower the wiper arms back onto the windshield.
- Turn on the ignition and test the wipers to ensure proper operation and to confirm the blades are seated correctly.
Ensure the blades are firmly clicked into place and that there are no loose edges. If the blade or adaptor feels loose, remove it and reattach it, making sure the locking mechanism is engaged.
Rear wiper blade replacement (if applicable)
Not all 2019 Civics have a rear wiper. If your Civic Hatchback or certain trims include a rear wiper, this is how you replace it. For vehicles without a rear wiper, skip this section.
- Lift the rear wiper arm away from the rear window until it stays in a raised position.
- On the blade’s base, locate the release tab or button and press to unlock the blade from the arm’s adaptor.
- Slide the old blade out of the adaptor and remove it from the arm.
- Attach the new blade by sliding it into the adaptor until it is securely seated, then lower the wiper arm back onto the glass.
- Test the rear wiper by activating it briefly to ensure proper operation and to verify the blade is properly installed.
Rear blade installation can vary by trim; always verify you’re using the correct blade size and adaptor for the rear wiper on your specific model.
Tips for choosing and maintaining blades
Blade selection
Choose blades with a high-quality rubber compound suitable for your climate. Consider winter blades if you live in cold or icy conditions, and ensure the blades come with a universal or Honda-approved adaptor compatible with your wiper arms.
Maintenance and care
Regularly inspect blades for nicks, cracks, or stiffness. Clean the blade edges with a damp cloth to remove oil, wax, and debris, which can reduce performance. Replace blades every 12 months to 24 months, or sooner if you notice streaking or skipping.
Summary
Replacing the wiper blades on a 2019 Honda Civic is a straightforward DIY task that takes just a few minutes per blade. Start by lifting the arm, releasing the old blade, and snapping the new one into the arm’s adaptor. Front blades are typically 26 inches (driver) and 19 inches (passenger); rear blades, when present, are usually around 11 inches. Always test after installation to ensure clean and even contact with the windshield. With the right blades and careful installation, you’ll maintain clear visibility in all weather conditions.
How to change the windshield wipers on a 2019 Honda Civic?
It's best just to put a microfiber cloth just at the base of your windshield to protect. It. Now to insert your new wiper blades just depress the two tabs on the side of the wiper blade housing.
Which engine oil is best for a Honda Civic?
full synthetic 0W-20 engine oil
Modern Honda Civics require full synthetic 0W-20 engine oil, a specific viscosity grade providing optimal protection for Civic engine components while contributing to improved fuel efficiency.
Ask about result
How to put Honda Civic windshield wipers up?
Turn the vehicle on and raise the wiper stock. Again to learn more about the features offered on your Honda. Visit hondaelp.ca.
What windshield wipers go on a 2019 Honda Civic?
The 2019 Civic uses a different wiper blade size between the left and right side. In most cases, you'll need a 26-inch wiper for the driver's side and an 18-inch wiper blade for the passenger side, or you can match the old blade with a new one. If you're unsure which option to pick, an associate would be happy to help.
Ask about result