The paint code most commonly used for Audi Ibis White is LC9Y. However, codes can vary by model year and market, so you should verify with your specific vehicle.
What this means: Ibis White is a well-established shade in Audi's lineup, and LC9Y serves as the standardized identifier for most contemporary models. If you're ordering touch-up paint, a panel refresh, or a new fender, confirming the exact code for your car is essential to avoid mismatches.
Understanding the code and where it appears
Paint codes are four-character alphanumeric identifiers assigned by the manufacturer. In Audi's system, LC9Y is the code you’ll see on a label attached to the car and often on the Build/Options sheet. This code is used by body shops and paint suppliers to mix the exact color and finish called Ibis White.
Where to find the paint code on your Audi
To locate the code on your vehicle, check the most common sources seen across Audi manuals and service literature:
- Driver-side door jamb sticker: Often the quickest place to find the color code along with other vehicle details.
- Trunk or hatch area: Some models place the sticker in the spare wheel well or under the trunk liner.
- Engine bay or firewall label: In certain regions, the paint code appears near the radiator or shock tower area.
- Your owner's manual or service booklet: The paint code sometimes appears on the maintenance section.
- VIN-based dealer query: Providing your VIN to an Audi dealer will return the exact color code for the production batch.
Using these sources will help you confirm that LC9Y (or the correct regional variant) is the correct paint code for your Ibis White car.
Common variants and year-to-year notes
Regional differences
In some markets, especially outside North America and Europe, the Ibis White shade may be cataloged under slightly different internal codes or have variations in finish (solid vs. pearl). When in doubt, rely on the dealer or a current color code sheet for your model year.
Recent model usage
From mid-2010s through the 2020s, LC9Y has been the predominant code associated with Ibis White on a wide range of Audi models, including A3, A4, A5, and SUVs. Always verify against your car's specific label to be sure.
When you’re ordering paint or a touch-up kit, you should specify the code LC9Y, the year/model, and whether you need a solid or metallic finish to ensure a precise match.
How to use the paint code for matching and ordering
Once you’ve confirmed the code, use it as the primary identifier when purchasing touch-up paint, spray cans, or professional refinishes. The steps below help ensure you get the exact shade and finish.
- Record the paint code from the vehicle label (for example, LC9Y) and note the model year and trim, as some finishes vary by year.
- Choose the correct finish from the supplier’s options (solid, pearl, metallic, or matte if applicable).
- When ordering, provide the paint code along with the region (EU, US, etc.) to avoid mismatches in shade or clearcoat.
- Confirm the batch or base color if you’re doing a full panel match with multiple coats to ensure consistency across panels.
- Test the color on a small, inconspicuous area before proceeding with larger repairs.
Following these steps helps ensure that the final result blends seamlessly with the existing Ibis White panels.
Summary
LC9Y is the standard paint code associated with Audi Ibis White on most recent models, but regional and year-to-year variations can occur. Always verify the exact code on your vehicle through the door jamb label, VIN lookup, or a trusted Audi dealer to ensure color accuracy for touch-ups or full refinishes.