The 2008 Honda Accord uses a 5-lug bolt pattern of 114.3 mm (4.5 inches) with a hub bore of 64.1 mm.
In more detail, this pattern—5 lugs arranged on a 114.3 mm circle—is standard for the 2008 Accord across most trims. When replacing wheels, you must match this bolt pattern exactly. If a wheel has a larger center bore than 64.1 mm, you may need hub-centric rings to ensure proper centering and avoid vibrations. Always verify compatibility for your specific trim and wheel choice.
Key specifications you should know
Use this quick reference when shopping for new wheels or when checking compatibility.
- Bolt pattern: 5x114.3 mm (five lug holes on a 114.3 mm circle)
- Center bore: 64.1 mm
- Stud size and lug nut type: typically 12 mm studs with 1.5 mm thread pitch; lug nuts are usually 60-degree conical-seat
- Hub-centric considerations: aftermarket wheels may require hub-centric rings to center on a 64.1 mm bore
Knowing these specifications helps ensure safe installation and proper wheel alignment on a 2008 Accord.
Why the lug pattern matters for wheel compatibility
A correct bolt pattern is non-negotiable for mounting wheels safely. A mismatched pattern will not mount correctly and can lead to unsafe driving conditions, vibrations, or damage to the wheel studs. Always confirm the bolt pattern, center bore, and lug nut specifications before purchasing wheels or adapters.
Summary
The 2008 Honda Accord relies on a 5-lug, 114.3 mm bolt pattern with a 64.1 mm center bore. When selecting wheels, ensure exact pattern match, check center bore and hub-centric needs, and verify lug nut size and seating to maintain safe, proper fitment.