The 2017 Nissan Altima 2.5 uses SAE 5W-30 full synthetic engine oil for normal driving in most climates.
The 2017 Altima 2.5, powered by a 2.5-liter four-cylinder engine, relies on high-quality oil that meets specific standards to protect engine components, maintain fuel efficiency, and support warranty requirements. The exact viscosity and certifications are outlined in Nissan’s guidance and are typically applicable across most driving conditions, though climate can influence small adjustments. Always confirm with the owner's manual or a Nissan dealer for climate-specific recommendations.
Official oil specification
Here's a concise summary of what to use and what to look for when selecting oil for the 2017 Altima 2.5.
- Viscosity: SAE 5W-30
- Oil type: Full synthetic engine oil is preferred; synthetic blend may be acceptable if it meets the same specification
- Certifications: API SN (or newer) and ILSAC GF-5 (or GF-6) certified
- Capacity: Approximately 4.5 quarts (with filter) per service specification
Using the recommended viscosity, oil type, and certification helps ensure proper lubrication, cold-start protection, and long-term engine reliability. Always verify against the official manual for your exact vehicle and region.
Climate considerations and practical tips
While SAE 5W-30 covers a broad range of temperatures, very cold or hot environments can influence oil performance and factory guidance. When in doubt, consult the owner’s manual or a Nissan service advisor for any climate-specific notes or local warranty requirements.
Summary
For a 2017 Nissan Altima 2.5, the recommended oil is SAE 5W-30 full synthetic engine oil meeting API SN or newer and ILSAC GF-5 (or GF-6) standards. The typical oil capacity with a filter change is about 4.5 quarts. Always refer to the owner’s manual or your local Nissan dealer for any climate-specific adjustments and to confirm the exact specifications for your vehicle.