The factory lug nuts for a 2013 Dodge Dart use M14x1.5 threads with a 60-degree conical (tapered) seat, and a 19mm hex across flats. The typical torque spec is about 100 ft-lb (135 Nm). If you have aftermarket wheels, the nut size or seat may differ, so verify with the wheel manufacturer or your service manual.
Key lug nut specifications for the 2013 Dodge Dart
Below are the standard specifications you’ll most commonly encounter with the factory wheels. These details help ensure proper fit and safe installation.
- Thread size: M14x1.5
- Seat type: 60-degree conical (tapered) seat
- Hex size (across flats): 19 mm
- Torque specification: approximately 100 ft-lb (135 Nm)
- Compatibility note: Primarily for factory wheels; aftermarket wheels may require different lug nuts
These specifications cover the typical configuration on most 2013 Dodge Dart models equipped with stock wheels. Always confirm against your specific build or with a dealer if you’re unsure, especially when wheels have been swapped.
Considerations for aftermarket wheels
If your Dart is fitted with aftermarket wheels, the lug nut size, seat type, and torque can change. Some aftermarket wheels use different seat designs (flat, ball, or various cone angles) or different thread sizes. Always match lug nuts to the wheel manufacturer’s recommendations and re-torque after installation to the recommended specification.
Summary: For a 2013 Dodge Dart, the common lug nut size is M14x1.5 with a 60-degree conical seat and a 19mm hex, torqued to about 100 ft-lb. Verify your exact setup with your owner’s manual or a trusted technician if you’re using aftermarket wheels or different trims.
Are all lug nuts 21mm?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Ask about result
What size is a Dodge lug nut?
With a thread size of M14x1. 5, the installation process is quick and straightforward.
Ask about result
What size lug nuts does a 2013 Dodge Dart have?
| Item Specifics | |
|---|---|
| Thread Pitch | 12mm x 1.5 or 12x1.5 or M12x1.5 |
| Manufacturer Warranty | Lifetime |
| Hex Size | 19mm |
| Interchange Part Number | 12x1.5 Lug Nuts |
Ask about result
What size are the wheel bolts on a Dodge Dart?
Dorman – Wheel Bolt: M12-1.25 Thread, Conical 60, 19 mm Hex, Chrome (Sold by each) (Part No. 611-005)
Ask about result