The cabin air filter on a Jeep Renegade is located behind the glove box on the passenger side; you access it by lowering the glove box and removing the filter cover.
Location and access: what to expect
In most Renegade models, the filter sits in the HVAC housing just behind the glove box. It’s designed for fairly straightforward replacement without special tools, though a flashlight can help you see the housing and clips more clearly. Replacing the filter helps maintain cabin air quality, especially in dusty or urban environments.
Step-by-step replacement
Follow these steps to locate and replace the cabin air filter in a Jeep Renegade.
- Open the glove box and gently press in on the sides to release the stops, then lower the box to reveal the HVAC housing behind it.
- If your model has a glove box damper, unhook or remove it so the box can drop fully.
- Find the rectangular filter cover behind the glove box and release its clips or screws to remove the cover.
- Slide out the old cabin air filter and note the airflow direction printed on the edge (an arrow indicates the correct orientation).
- Clean any debris from the housing, then insert the new filter with the arrows pointing in the correct direction.
- Reinstall the filter cover, reattach the glove box damper if you removed it, and lift the glove box back into its normal position.
- Test the system by turning on the blower to ensure air flows properly through the new filter.
Once the new filter is in place and the housing is secured, reassemble the glove box and verify the damper is attached if it was removed, then run the HVAC for a quick check.
Variations by year and trim
Most Renegade models from recent years keep the filter behind the glove box, but some trims or model years may use a slightly different clip or damper arrangement. If you can’t locate the cover or it looks different, consult the owner's manual or a service guide for your exact year and VIN.
Summary
For Jeep Renegade owners, the cabin filter is typically tucked behind the passenger-side glove box in the HVAC housing. Access it by lowering the glove box, remove the filter cover, replace the old filter with a new one (ensuring the airflow arrows are correct), and reassemble. Regular replacement helps maintain interior air quality and HVAC performance.