Prices for a water pump on a Chrysler Sebring typically range from about $30 to $210 for the part alone, with total installed costs commonly between roughly $350 and $900 depending on engine, year, and labor rates.
The Chrysler Sebring spanned multiple generations (1995–2010) and used different engines, which affects part pricing. Availability of OEM versus aftermarket parts, whether a timing belt kit or gasket set is included, and regional labor rates all influence the final bill. This article breaks down typical price ranges and what drives them, helping you estimate a fair replacement cost.
What affects the price
Several factors determine how much you’ll pay for a Sebring water pump, spanning parts quality, engine configuration, and the service you choose. The main variables are listed below.
- Engine type and year: Sebring models used different engines over their production run, so pump designs and prices can vary by model year and engine displacement (for example, 2.4L four-cylinders and various V6 options).
- Part source: aftermarket/new pump, remanufactured pump, or OEM/dealer parts all have different price points.
- Additional components: if the replacement requires a timing belt kit, gasket set, pulleys, or a serpentine belt, those add to the cost.
- Labor rate and job scope: regional labor rates and whether timing-belt-related work is needed affect total labor cost.
In general, parts price varies with source and engine, while labor costs depend on shop and region. The following ranges reflect common market prices observed in U.S. auto parts outlets and service centers.
Typical price ranges for the pump itself
Prices shown are for the pump alone (not counting labor). They vary by source and engine. Use these as rough benchmarks when shopping.
- Aftermarket/new water pump: $40–$100
- OEM/dealer water pump: $120–$210
- Remanufactured water pump: $25–$90
- Gasket set and seals (if not included): $8–$25
- Timing belt kit (if required for the job): $60–$120
These part-price ranges can shift based on retailer promotions, shipping costs, and whether you buy as a kit that includes timing components or just the pump itself. Always check the exact part number for your Sebring’s year and engine before purchasing.
Installed cost ranges
Labor costs to replace a water pump can vary widely. The following ranges illustrate typical total installed price across common scenarios.
- Independent auto shop: roughly $350–$700 total (parts plus labor).
- Franchise chain shop: roughly $450–$800 total.
- Dealership service: roughly $500–$900+ total, depending on hours and parts.
Most installations take about 2–5 hours, with longer times if a timing belt kit or other major components are included. Prices reflect common regional labor rates and standard job scopes.
Buying options and what to expect
Where you buy the part can influence both price and warranty. Here are typical buying options and their price implications.
- Aftermarket parts from auto parts stores: $40–$100 for a pump, with optional gaskets or kits adding small costs.
- OEM parts from the dealer or authorized distributors: $120–$210 for the pump itself, plus any related components.
- Remanufactured pumps from online retailers or rebuilt-parts suppliers: $25–$90, often with shorter warranties.
When choosing, consider warranty length, return policy, and whether the kit includes timing components, which can save time and prevent additional trips to the shop.
Summary
For a Chrysler Sebring, plan for a water-pump part cost ranging from roughly $25 to $210, with total installed prices typically between $350 and $900 depending on engine, labor rates, and whether a timing-belt kit or other components are needed. Always obtain a written estimate that separates parts and labor, and confirm exactly which components are included in the replacement package.
Bottom line
Prices are highly engine-dependent and shop-dependent. If you’re budgeting for a Sebring water-pump replacement, start with the part cost (consider OEM vs aftermarket) and add labor estimates based on your region and whether timing components are involved. Getting multiple quotes and confirming included components will help ensure you’re getting a fair, transparent price.
Can I still drive my car with a bad water pump?
Driving with a failing water pump is a gamble. Even if the car seems fine for a few miles, overheating can occur suddenly and without much warning. Once that happens, the damage can begin in minutes.
How much is a water pump for a 2006 Chrysler Sebring?
$794 - $896. “Dealer” refers to service centers that specialize in one or two makes and sell those vehicles. As a franchise dealer: They use top-quality manufacturer-recommended or “official” parts.
How much does it cost to replace a water pump in a 2004 Chrysler Sebring?
The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor). Of course, shopping around to get a few quotes is your best bet to get the best deal.
How much does it cost to replace a water pump in a Chrysler?
The average cost for a Chrysler 300 Water Pump Replacement is between $861 and $1,116. Labor costs are estimated between $545 and $799 while parts are typically priced around $317. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.