The 2013 Accord’s oil capacity depends on the engine: about 4.5 quarts (with a filter) for the 2.4-liter four-cylinder, and about 5.7 quarts (with a filter) for the 3.5-liter V6.
Engine options and official capacities
The 2013 Accord was offered with two engines. The capacities listed below assume a fresh oil filter is replaced during an oil change.
Quick reference by engine:
- 2.4 L inline-4 engine: 4.5 quarts (4.3 L) of oil with filter.
- 3.5 L V6 engine: 5.7 quarts (5.4 L) of oil with filter.
For most owners, slight variations can occur due to factory tolerances or how the oil is measured. After filling, start the engine, inspect for leaks, and then recheck the oil level with the dipstick and adjust if necessary.
Oil grade and maintenance tips
Honda specifies a high-quality synthetic oil for both engines in the 2013 Accord. Using the right viscosity and keeping up with the maintenance schedule helps protect the engine.
Here are practical notes to accompany the oil capacity information:
- Recommended oil type: 0W-20 full synthetic (Honda-approved or equivalent).
- Alternative viscosity: 5W-20 may be used in very warm climates if permitted by the owner's manual, but 0W-20 is the standard recommendation.
- Oil-change interval: follow the owner's manual; with synthetic oil, many drivers target around 7,500 miles under normal driving, and shorter intervals if conditions are severe or conventional oil is used.
Always follow the manufacturer’s schedule and ensure the oil filter is replaced during every oil change for optimal engine life.
Summary
The 2013 Honda Accord requires about 4.5 quarts of oil for the 2.4L four-cylinder engine and about 5.7 quarts for the 3.5L V6, both with a replaceable oil filter. Use 0W-20 full synthetic oil and adhere to Honda’s maintenance intervals to maintain proper lubrication and performance.