Approximately 7 quarts (about 6.6 liters) of engine oil are needed for a full change with a new filter on the 2019 Ram 1500 equipped with the 5.7 L Hemi V8. If you’re not replacing the filter, the amount is typically around 6 quarts (roughly 5.7 liters).
This figure applies to the well-known 5.7 L Hemi used in most 2019 Ram 1500 models. Exact capacity can vary slightly depending on the oil filter size and whether you perform a complete drain and fill or a top-up. For the most accurate specification for your vehicle, consult your owner’s manual or a Ram dealer. The standard oil viscosity recommended is 5W-20 full synthetic that meets Mopar MS-6395.
Below is a concise breakdown of the typical capacity figures and the recommended oil specification for this engine.
- Capacity with a new oil filter: 7 quarts (6.6 liters).
- Capacity without replacing the filter: about 6 quarts (5.7 liters).
- Recommended oil: 5W-20 full synthetic meeting Mopar MS-6395 specification.
In practice, keep a little extra oil on hand to account for variations in filter size and drain procedure. After an oil change, fill to the full mark on the dipstick and recheck the level to ensure accuracy.
Oil capacity and maintenance notes
The numbers above reflect the common configuration for the 2019 Ram 1500 with the 5.7 L Hemi. Always verify the exact specification for your VIN in the owner's manual. Use a 5W-20 full synthetic oil that meets Mopar MS-6395, and perform a full drain and fill when changing the oil with a new filter for an accurate capacity reference.
Why these figures matter
Using the correct oil amount ensures proper lubrication, cooling, and engine longevity. Overfilling can cause foaming and leaks, while underfilling can lead to inadequate lubrication. When in doubt, consult a dealership or trusted mechanic and use a calibrated dipstick check after filling.
Summary
For a 2019 Ram 1500 with a 5.7 L Hemi V8, plan to use about 7 quarts (6.6 liters) of oil for a full change with a new filter, or roughly 6 quarts (5.7 liters) if the filter isn’t replaced. Follow the Mopar MS-6395 specification and 5W-20 full synthetic oil, and always confirm the exact amount for your vehicle with the owner’s manual or a Ram service professional.