The rear wiper blade for the 2016 Honda CR-V is 12 inches long.
The 2016 CR-V, part of the fourth generation (2012–2016), uses a single rear wiper blade mounted on the tailgate. For most US-spec models, that blade measures 12 inches (about 30 cm). If you’re purchasing a replacement, look for a 12-inch blade with the appropriate connector for Honda’s tailgate wiper arm. Below is a detailed guide to sizes, options, and how to replace it.
Size at a glance
The standard rear wiper blade length for the 2016 Honda CR-V is 12 inches. This size applies across most US-market trims for that model year. If you’re buying blades from a retailer, the packaging should clearly indicate 12" or 300 mm. If you’re unsure, measure the current blade or compare it to a known 12-inch blade in the store.
Markets and variations
While 12 inches is the common size for the US-spec 2016 CR-V, rear wiper blade sizes can vary by market or occasional trim-specific differences. If your vehicle was bought outside the US or in a non-standard configuration, verify by measuring the existing blade or consulting the vehicle’s manual or a local dealer.
Replacement options
When shopping for a replacement, you have a few credible options. The list below covers the common choices and what to look for on packaging.
- OEM Honda 12-inch rear blade
- Aftermarket brands (examples include Bosch, Rain-X, Denso, ACDelco) that offer 12-inch rear blades compatible with Honda tailgate mounting
- Check connector compatibility (most 12-inch blades use a standard rear-blade connector for the CR-V’s wiper arm); confirm whether yours is a hook, pin, or bayonet style
In practice, 12-inch rear blades from these brands are readily available and should fit the 2016 CR-V without modification. If you prefer aftermarket savings, choose a blade labeled as compatible with Honda CR-V models around 2012–2016 and verify connector type before purchasing.
How to replace the rear wiper blade
- Lift the rear wiper arm away from the glass to give yourself room to work.
- Locate the blade’s release mechanism at the connector and press or slide the release to detach the old blade from the arm.
- Slide the old blade out of the connector, then align the new 12-inch blade with the arm’s connector and insert until it clicks or is securely seated.
- Lower the wiper arm back to the window carefully to avoid contact with the glass.
- Test the rear wiper to ensure smooth operation and proper contact across the entire window.
Tip: When replacing, wipe the wiper blade track on the glass with a soft cloth and inspect the blade for wear. A fresh blade will perform better in rain or inclement weather.
Summary
For the 2016 Honda CR-V, the rear wiper blade size is 12 inches. You can buy an OEM Honda blade or a reputable aftermarket 12-inch blade from brands like Bosch, Rain-X, Denso, or ACDelco. Ensure the connector matches your tailgate wiper arm, and follow a simple replacement process to swap in the new blade. Confirm the size on the packaging if you’re uncertain, and you’ll be ready for all-weather visibility in the rear.