The engine oil capacity for a 2013 Chevy Cruze with the 1.4-liter turbo is 4 quarts (about 3.8 liters) when performing an oil change that includes a new filter.
In more detail, this figure reflects the full capacity of the crankcase with the oil filter installed. For an oil change, you should replace the filter and add oil until the dipstick indicates the proper level; depending on drain duration and filter, you may end up adding a touch more or less, but planning for about 4 quarts is standard.
Official capacity and how to apply it
Below is the capacity figure you should rely on when ordering oil for a change and when filling the engine.
- Engine oil capacity with filter: 4 quarts (3.8 L)
When you complete the change, ensure the level on the dipstick is within the recommended range; if needed, add small amounts to reach the midpoint or full mark as specified in the manual.
Oil type and maintenance guidance
The 1.4 L turbo in the Cruze generally requires Dexos1 Gen 2 compliant oil, with viscosity around 5W-30 for a broad range of temperatures. Using synthetic or synthetic-blend oils is acceptable as long as the oil meets Dexos1 Gen 2 specifications. Always confirm the exact specification for your vehicle's production date and climate with the owner's manual or a Chevrolet dealer.
Choosing the right oil for your climate
In colder climates, a 0W-30 or 5W-30 may be recommended; in hotter climates or heavy-use scenarios, a 5W-30 is commonly advised. The key is Dexos1 Gen 2 compatibility and staying within the manufacturer’s viscosity guidelines.
Summary
For a typical oil change, the 2013 Chevy Cruze 1.4 L requires about 4 quarts of engine oil with a new filter. Use Dexos1 Gen 2 5W-30 oil (synthetic or synthetic-blend) and verify the level with the dipstick after filling.