The cabin air filter on most Chrysler 200 models sits behind the glove box on the passenger side. You access it by lowering the glove box and removing a small cover for the filter housing, then sliding out the old filter and installing a new one. This guide explains exactly where it is, how to replace it, and tips for keeping the cabin air clean.
In this article, you’ll learn the precise location, the steps to replace the filter, and how to maintain it over time for better airflow and odor control inside your Chrysler 200.
Location and Access
What to look for
The filter housing is mounted behind the glove box on the passenger side of the dash. It’s a rectangular opening with a removable cover. Accessing it requires dropping the glove box and loosening a few fasteners or clips that hold the cover in place.
Follow these steps to locate and gain access to the cabin air filter:
Before you begin the replacement, prepare by ensuring the car is off and parked in a safe area. You’ll need a clean working space inside the passenger footwell to maneuver the glove box and filter.
- Open the glove box. Remove any contents so you can reach the sides and the damper if needed.
- Gently squeeze the sides of the glove box to release the stops and allow the box to drop down fully. In some models you may need to unclip or disconnect a small glove box damper.
- Look for a rectangular filter housing behind the glove box. You should see a small cover or door secured with clips or tabs.
- Remove the filter housing cover by unclipping or unsnapping it. Set the cover aside.
- Slide the old cabin air filter out. Note the orientation of the filter so you can install the new one the same way. Most filters have arrows showing the airflow direction.
- Insert the new filter with the arrows pointing toward the blower motor, then reattach the housing cover securely.
- Raise the glove box back into position and ensure it latches or damper re-engages. Return any contents you removed.
After replacing the filter, you can turn on the car and run the HVAC system to confirm airflow is normal and there are no unusual sounds from the blower.
Replacing the cabin air filter is a straightforward maintenance task that improves airflow, reduces musty odors, and helps keep pollen and dust out of the cabin when you drive.
Regular maintenance and a quick replacement can keep your Chrysler 200’s interior air fresh, especially if you drive in dusty or urban environments where filters clog more quickly.
Maintenance and Replacement Tips
To keep the cabin air system in top shape, consider the following guidelines and practices.
- Replacement interval: Most drivers replace the cabin air filter every 12,000–15,000 miles or about once a year, but in dusty or polluted environments you may need to replace it more often.
- Indicator symptoms: Reduced airflow from the vents, noticeable musty or moldy smells, or increased allergy symptoms inside the car are common signs that the filter needs replacement.
- Filter quality: Use a filter that fits your vehicle’s specifications. Some drivers opt for activated carbon or pollen-removing variants for better odor control and allergy relief.
- Inspect before installing: Check the filter for excessive dirt, debris, or signs of moisture. If the filter is wet or moldy, replace it and check for any leaks that could cause moisture buildup.
- Environment considerations: If you frequently drive in construction zones or dusty roads, check and replace the filter more often to maintain optimal HVAC performance.
By sticking to a regular replacement schedule and choosing a filter appropriate for your driving conditions, you’ll maintain better cabin air quality and HVAC efficiency in your Chrysler 200.
Summary
The Chrysler 200’s cabin air filter sits behind the glove box on the passenger side. Access it by dropping the glove box, removing a small cover on the filter housing, and replacing the filter with the correct orientation. Plan for roughly yearly replacements or sooner in dusty environments, and use a filter that meets your climate needs to keep the interior air clean and the HVAC system performing well.
Does a cabin air filter help with allergies?
Cabin air filters also help to reduce the amount of those allergens that can get into your vehicle. Pollen, dust and other allergens can build up in your filter during heavy pollen season, so you may need to change it sooner.
Does a dirty cabin filter affect AC?
Yes, a dirty cabin air filter can reduce the efficiency of your car's air conditioning system by restricting airflow, causing it to work harder and reducing its performance.
What are three symptoms of a clogged cabin air filter?
3 Signs Your Cabin Filter is Clogged
- There's Little Flow. The cabin filter is, essentially, a component of the air conditioner structure in your car.
- Dust. Another sign is is that you're seeing more than the usual amount of dust and debris inside your car.
- Less Vehicle Power.
Where is the cabin air filter located in a Chrysler 200?
The cabin filter is located on the left corner of the footwell remove the side panel.