The paint code for a Jeep Grand Cherokee is a short alphanumeric identifier (usually 2–3 characters) found on the vehicle’s data plate. It is most reliably located on the driver’s door jamb and is what you’ll use to match touch-up paint or order a color repaint.
In this article, you’ll learn the common places to look for the paint code on a Grand Cherokee, what the code looks like, and what to do if you can’t locate it. The exact placement can vary by model year and trim, but the door-jamb sticker is the standard starting point.
Where the paint code is usually located
Look at the driver’s door area first. If you don’t see it there, check a couple of other spots that are sometimes used on different years or trims.
- Driver’s door jamb data plate (the most common location). Open the driver's door and read the label on the door frame or B-pillar. Look for a line labeled Exterior Color, Paint, or similar; the paint code is a 2–3 character code.
- Glove box label (some model years place the data plate or color code in the glove box).
- Engine bay area (radiator support/inner fender) on certain years or trims where a separate color tag is attached.
If you still can’t locate the code after checking these spots, you may need to pull the information from the vehicle’s build data via a dealership or a VIN-based lookup.
What to do if you can’t find the paint code
With the VIN in hand, you can verify the original exterior color with a Jeep dealer or a trusted auto body supply shop. They can pull the default paint code from the build data and confirm the exact shade for your specific Grand Cherokee.
- Locate the paint code on the car first (door jamb, glove box, or engine bay tag).
- If not found, have the dealership look up the color by VIN or chassis number.
- Use the code to order touch-up paint or arrange a match with an auto body shop.
- Test the color match on a small area before a full repaint.
Using the correct paint code ensures an accurate match and helps avoid mismatched color tones across body panels.
Summary
The Jeep Grand Cherokee’s paint code is typically a 2–3 character identifier found on the driver’s door jamb data plate. If not visible there, check the glove box or engine bay tag, and if necessary, have a dealer retrieve the code using your VIN. With the code, you can order the right color touch-up paint or coordinate a precise repaint.
Can I look up a paint code by VIN number?
Use an Online Decoder: There are many free websites where you can type in your VIN. These tools “read” the code and list your car's original factory details. Check the “Paint” Field: Look for a section labeled “Color” or “Paint Code.” It is usually a mix of letters and numbers like WA8555 or NH-731P.
Which Jeep is the fastest?
- 8 2014 Jeep Cherokee Pentastar V6.
- 7 2025 Jeep Wagoneer S.
- 6 2006 Jeep Commander HEMI V8.
- 5 2005 Jeep Grand Cherokee HEMI V8.
- 4 2011 Jeep Grand Cherokee HEMI V8.
- 3 2006 Jeep Grand Cherokee SRT8. Top Speed: 152 mph.
- 2 2012 Jeep Grand Cherokee SRT8. Top Speed: 157 mph.
- 1 2021 Jeep Grand Cherokee Trackhawk. Top Speed: 180 mph.
How do I find my Jeep paint code?
Paint. Want all the knowledge. Products supplies to repair rock chips scratches or paint damage get it all at erapaints.com.
Where is the paint code on a Jeep Grand Cherokee?
And everything in there seats. So that's where you look you look on the driver's side door. And you'll find it and you look for P A I N T paint and then it'll give you the code.