Across Dodge Charger's generations, the two-wiper size pair most commonly used is 24 inches on the driver's side and 20 inches on the passenger side. The exact sizes depend on the model year and trim, so always verify with the owner's manual or a VIN-based parts lookup.
Understanding the sizes across generations
Wiper blade size evolves with design changes, so the exact lengths you need can vary. The following guidance covers the typical sizes you’re likely to encounter when shopping for a Charger. Use this as a baseline, but confirm for your specific vehicle.
- Most Dodge Charger models use a 24-inch blade on the driver's side and a 20-inch blade on the passenger side.
- Some late-model Chargers or specific trims may use a 22-inch driver blade, typically paired with a 20-inch passenger blade. Always confirm for your vehicle.
Conclusion: These sizes cover the majority of Chargers, but there are exceptions. The safest approach is to verify with the owner's manual or a trusted parts lookup tool using the vehicle’s VIN.
How to confirm the exact size for your Charger
To ensure compatibility, follow these steps to determine the correct blade sizes for your specific Charger:
- Check the owner's manual or a reputable dealership parts page for a size chart specific to your year, model, and trim.
- Inspect the current blades and measure their length from tip to connector base if you’re replacing individually.
- Use a VIN-based parts lookup on an auto parts site (enter year, make, model, and trim, then select wiper blades) to get exact recommendations.
- Purchase a matched set labeled as compatible with your Dodge Charger for your year. If in doubt, ask a parts professional for cross-reference numbers.
Note: Chargers typically use two front blades; there is no separate standard rear blade on most models, but verify your specific trim if you’re unsure.
Summary
In short, the most common front wiper blade sizes for a Dodge Charger are 24 inches on the driver’s side and 20 inches on the passenger side, but exact sizes can vary by year and trim. Always verify with the owner's manual or a VIN-based lookup to ensure a precise match, and consider replacing both blades as a pair for even performance.