Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How do I change a windshield wiper blades in a 2017 Hyundai Tucson?

Front wiper blades on the 2017 Hyundai Tucson are typically 26-inch on the driver's side and 17-inch on the passenger side, with a rear blade of about 11 inches if your model has one. The basic steps are lift the wiper arms, release the old blades, attach the new ones, and lower the arms back onto the windshield.


The following guide walks you through identifying the right sizes, selecting compatible blade types, and performing the replacement on both the front and rear (if equipped) wipers. It’s designed to be practical for DIY momentary repairs done in a driveway or garage.


What you’ll need


Before you begin, gather the blades and any basic supplies to make the swap smooth:



  • Replacement wiper blades sized for a 2017 Hyundai Tucson: 26-inch drivers-side, 17-inch passenger-side (front). Rear blade typically 11 inches if your vehicle has a rear wiper.

  • Microfiber cloth to wipe the glass and blades clean.

  • Optional rubber cleaner or isopropyl alcohol to remove residue from the wiper arms if needed.


Having the correct sizes on hand ensures a secure fit and a clean wipe. The next section covers the front blade replacement steps in detail.


Front wiper blade replacement


Follow these steps to replace the two front blades on your Tucson. Ensure the engine is off and the keys are out, and gently maneuver the arms away from the windshield to expose the blade connectors.



  1. Lift the wiper arms away from the windshield until they stand perpendicular to the glass.

  2. Release the old blade from each arm. Depending on the blade brand, press the release tab or rotate the blade to detach it from the hook-style connector.

  3. Attach the new blades. Slide or snap the new blade onto the arm’s connector until you hear or feel a click indicating it’s secured.

  4. Lower the arms back onto the windshield and ensure the blades sit flat against the glass.


After installation, test the blades with a quick wipe to confirm a clean sweep and check that there are no gaps or streaks. If needed, wipe the blade edges and remove any packaging residue.


Attachment styles and sizing notes


Most 2017 Tucson front blades use a standard hook-style connector. If your replacement uses a different connector, follow the manufacturer’s instructions. If you’re unsure about the size, verify on your door jamb sticker or in your owner’s manual, or bring the old blade to a parts retailer to compare.


Rear wiper blade replacement (if equipped)


If your Tucson has a rear wiper, these steps apply to replacing that blade. Not all trims include a rear wiper; verify before starting.



  1. Lift the rear wiper away from the rear window until it stays out of the glass area.

  2. Release and remove the old blade by pressing any release tab or twisting, depending on the blade design.

  3. Install the new blade by sliding it into the same connector until it clicks into place.

  4. Lower the arm back onto the glass carefully.


Rear blades are typically around 11 inches, but always confirm the exact size for your model before ordering.


Maintenance tips for best results


To maximize performance and safety, replace wiper blades every 6–12 months or sooner if you notice streaking, skipping, or poor contact with the glass. Keep blades clean, avoid using them on dry glass, and use windshield washer fluid to help extend blade life.


Summary


Replacing the windshield wiper blades on a 2017 Hyundai Tucson is a straightforward job. Replace the front blades with 26-inch driver-side and 17-inch passenger-side blades and a rear blade around 11 inches if present. The process involves lifting, releasing, inserting, and reseating the blades, followed by a quick test. With the right blades and a careful approach, you’ll be ready for rain in minutes.


If you’d like, I can tailor this guide to your preferred blade brand or share quick shopping tips for reliable replacements in your area.

How to get windshield wipers up on Hyundai Tucson?


Out. So it does all the wipers. So the rear wipers. Out now you can replace it real easily same with these uh front straight up so you can replace those real easily.



What kind of windshield wipers for 2017 Hyundai Tucson?


26" 16" 14" Windshield Wiper Blades Replacement for Hyundai Tucson 2016 2017 2018 2019 2020 2021 Premium All Weather Front Rear Wipers Set - OEM Quality (Pack of 3)



Can I remove wiper arms without a special tool?


I often remove wiper arms using a wrench, when I haven't got any locking pliers around.



How to change wipers on Hyundai Tucson 2017?


And then press down on the lock. While pushing the lock pull down on the wiper. Blade then remove it from the arm. To place new blades on the arm.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.