Front blades: driver’s side 26 inches, passenger side 16 inches. Rear blade: 11 inches.
The 2017 Hyundai Elantra GT uses standard front and rear blade sizes that align with most Hyundai compact hatchbacks of that era. These measurements are commonly sold by auto parts retailers and should fit the vehicle without specialty adapters. Regional variations or aftermarket replacements may differ slightly, so it’s wise to double-check in the owner’s manual or by measuring the current blades before purchase.
Front wiper blade sizes
The front blades are sized to cover the primary windshield sweep for safe visibility. Use the following measurements when shopping for replacements.
- Driver's side: 26-inch blade
- Passenger side: 16-inch blade
Replacing both front blades as a matched pair helps ensure consistent clearing performance across the windshield. If one blade appears worn before the other, you can replace just the worn blade, but many drivers opt for a full front set to maintain even wiping quality.
Rear wiper blade size
The rear hatch window uses a shorter blade designed for the smaller swept area of the tailgate glass. Use this measurement when selecting a replacement.
- Rear: 11-inch blade
Rear blade replacements are typically straightforward and are often sold as a single blade. Always verify the length in the manual or by measuring the existing blade to ensure compatibility, especially if your Elantra GT is from a different market or has aftermarket aftermarket parts installed.
How to verify and replace
If you’re unsure about the exact sizes, you can confirm using a quick check or by consulting the owner’s manual. The steps below outline a practical approach to verify your current sizes before buying replacements.
- Open the hood (for the front blades) and lift the wiper arms away from the windshield to access the blades.
- Carefully release the connector and slide the blade off the wiper arm, noting the length of the blade you remove.
- Compare the length to the standard measurements listed above (26" and 16" for front, 11" for rear).
- If in doubt, bring the old blade or the model/year to an auto parts store to confirm compatibility before purchasing.
Following these steps helps ensure you get the right fit and avoid returns or mismatched blades that could impair visibility.
Summary
The 2017 Hyundai Elantra GT typically uses 26-inch driver-side and 16-inch passenger-side front wiper blades, plus an 11-inch rear blade. Always verify with the owner’s manual or by measuring the current blades, especially if your vehicle was built for a different market or has aftermarket parts. Replacing both front blades as a pair is common practice for optimal performance, while rear blade replacement is usually a simple single-blade swap.