The 2014 Honda Odyssey uses SAE 5W-20 engine oil, in a full synthetic or synthetic-blend formulation, that meets API SN or newer standards. The engine holds about 5.5 quarts with a filter. Always verify the exact specification in your owner’s manual or on the under-hood sticker.
In more detail, the Odyssey’s 3.5-liter V6 relies on this viscosity to balance cold-start performance with wear protection. Honda generally specifies 5W-20 for normal driving in most climates, and synthetic options can support longer drain intervals or harsher service. Choose an oil that meets API SN or newer and ILSAC GF-5 (or newer) standards, and use Honda Genuine Motor Oil or a reputable equivalent that carries those specs.
Recommended oil grade and specs
Key standards and options to consider when buying oil for the 2014 Odyssey are summarized below.
- Viscosity: SAE 5W-20
- Oil type: Full synthetic or synthetic blend
- Certifications: API SN (or newer); ILSAC GF-5 (or newer)
- Capacity: Approximately 5.5 quarts with a filter
In short, select a 5W-20 oil that is synthetic or synthetic-blend and meets API SN or newer standards, and replace the oil filter with every change. This helps maintain engine performance and longevity in the 2014 Odyssey.
Summary
For a 2014 Honda Odyssey, use SAE 5W-20 engine oil that meets API SN or newer standards, with synthetic or synthetic-blend formulations. The oil capacity is about 5.5 quarts with a filter. Always confirm with the owner’s manual or dealer for your specific vehicle, especially if you live in extreme temperatures or have special service considerations.