The cabin air filter in a 2017 Honda Accord can be removed by accessing the filter housing behind the passenger-side glove box, dropping the glove box to reveal the cover, and replacing the old filter with a new one oriented correctly. The process takes about 5–10 minutes and requires no special tools.
What you’ll need
Before you start, gather the items listed below so you can complete the replacement without interruptions.
- A replacement cabin air filter compatible with the 2017 Honda Accord
- A clean microfiber cloth or rag
- A flashlight (optional but helpful)
- Gloves (optional for handling debris)
Having the correct replacement filter and a clean workspace will make the swap quick and clean.
Where the filter is and how to prepare
The cabin air filter for the 2017 Accord is located behind the glove box on the passenger side. To access it, you typically need to drop the glove box by releasing its sides or a right-side damper, then swing down the filter cover inside the cavity. Clear out any items in the glove box and have a flashlight ready to inspect the housing for dust or debris.
Remove the old filter
Follow these steps to remove the existing cabin air filter from its housing.
- Open the passenger-side glove box fully and empty its contents.
- Gently squeeze the sides of the glove box inward (or release the damper) so the glove box can drop down and expose the filter housing.
- Locate the rectangular filter cover on the right side of the cavity and press the release tabs to swing the cover open.
- Pull out the old cabin air filter straight toward you. Take note of the orientation arrows on the filter.
- Inspect the housing for dust or debris and wipe it clean with the microfiber cloth if needed.
- Dispose of the old filter properly.
With the old filter removed, you’re ready to install the new one. Make sure the housing is clean and dry before seating the new filter.
Install a new filter
Proceed with installing the new cabin air filter, ensuring correct orientation and a secure fit.
- Take the new filter and verify its orientation. Align the arrows so they point toward the cabin (the direction of airflow into the vehicle).
- Slide the new filter into the housing until it sits flat and fully seated; you should feel or hear a gentle click as it seats.
- Reattach the filter cover and press it until the tabs click back into place.
- Lift the glove box back up and re-engage the damper or clips so the glove box closes properly.
- Return any items to the glove box and wipe down the area if needed.
After the installation, you can test the system by running the HVAC on fresh air and checking for unobstructed airflow through the vents.
Summary
Replacing the cabin air filter in a 2017 Honda Accord is a straightforward maintenance task that improves air quality and HVAC efficiency. Access is behind the passenger-side glove box; with the right replacement filter and a few minutes, you can complete the swap and restore proper airflow.