The rear wiper blade size for the 2020 Honda HR-V is 11 inches (about 28 cm). This length is the standard OEM size across trims, and it’s the size you should use when replacing the blade.
In this article, we verify the correct rear blade size for the 2020 HR-V, explain how to shop for replacements (OEM vs aftermarket), and outline simple steps to install or replace the rear wiper blade while offering tips to ensure clear rear visibility.
Size specification and what to look for
Knowing the exact length helps you avoid buying the wrong blade. For the 2020 HR-V, the official rear blade length is 11 inches (280 mm). When shopping, look for an 11-inch rear blade and verify that the blade is designed for a rear-position wiper (not a front wiper). Additionally, confirm the connector type on the blade to match your HR-V’s wiper arm.
Options often fall into two broad categories: OEM (Honda) replacements and reputable aftermarket blades. Both typically offer 11-inch rear blades, with various mounting styles (standard framed blade or modern beam-style blade). Choose the option that fits your budget, warranty preferences, and preferred maintenance cadence.
- OEM replacement blade size: 11 inches (280 mm). These are designed to match Honda’s specifications and fitment.
- Aftermarket blades: 11 inches, available from brands such as Bosch, Denso, Trico, and others. Ensure the product is labeled for the 11" rear wiper and compatible with your HR-V’s mounting style.
- Blade style options: traditional framed blades or beam-style blades, both offered in 11 inches by reputable brands. Check for rear-specific compatibility and warranty coverage.
Bottom line: for the 2020 HR-V, stick with an 11-inch rear blade and verify compatibility with the wiper arm connector before purchase.
How to replace the rear wiper blade
If you’re replacing the blade yourself, follow these steps to ensure a proper fit and a streak-free sweep.
- Park the vehicle on a level surface, turn off the engine, and gently lift the rear wiper arm away from the glass.
- Locate the blade’s release mechanism. Depending on the design, you may press a tab, slide a lock, or rotate the blade to disengage it from the arm.
- Remove the old blade from the arm and detach any adapters if required.
- Attach the new 11-inch blade to the wiper arm, ensuring it clicks into place and is securely seated.
- Gently lower the wiper arm back onto the rear window and test the sweep at low speed to confirm proper operation and coverage.
- Check for streaks or skipping; if needed, re-seat the blade or try a new blade with a slightly different connector style.
After replacement, it's a good idea to periodically inspect the blade for wear, especially after extreme weather, and replace it if you notice streaking, skipping, or reduced visibility during rain or snow.
Summary
For the 2020 Honda HR-V, use an 11-inch rear wiper blade (approximately 280 mm). You can choose OEM Honda replacements or trusted aftermarket brands, with options ranging from traditional framed blades to beam-style designs. Replacement is straightforward with basic steps: remove the old blade, attach the new one securely, and test the sweep. Always ensure compatibility with your wiper arm connector and warranty terms.