The cost to replace brake pads on a 2007 Honda CR‑V typically ranges from about $25 to $120 per axle, depending on brand and material; expect higher prices for ceramic or premium options and add labor if you have a shop install them.
This article breaks down current pricing, factors that influence what you’ll pay, and practical tips for shopping and installation. Prices vary by retailer, region, and whether you choose OEM or aftermarket parts, so use these ranges as a general guide for planning your budget.
Current price landscape
Prices for brake pads depend largely on material, brand, and whether you’re replacing the front or rear brakes. The following ranges reflect typical online and retail prices in the United States as of 2024–2025.
Typical price ranges by pad material
- Economy organic or semi-metallic replacement pads: about $25–$60 per axle
- Mid-range ceramic or ceramic‑metallic pads: about $60–$100 per axle
- Premium ceramic/hybrid or performance pads: about $100–$130+ per axle
In summary, you’ll generally pay more for front pads and for higher‑end materials, though prices can overlap between categories depending on brand and retailer.
What affects the price
Several factors beyond the material type influence the sticker price for brake pads on this older Honda CR‑V. Understanding them helps you compare quotes accurately.
Key price drivers
- Brand and quality: OEM vs aftermarket can create noticeable price differences
- Pad material: organic, semi-metallic, ceramic, or hybrid materials
- Front vs rear placement: front pads are typically more expensive
- Inclusion of hardware: shims, clips, and anti-squeal shims may be included or sold separately
- Retail channel: dealer, chain parts store, or online retailers
- Region and availability: local pricing and promotions vary
Overall, price is driven by material choice, the part’s position on the car, and where you buy it.
Labor costs and installation considerations
If you don’t replace the pads yourself, you’ll face labor charges in addition to the part price. Here’s what to expect for professional installation.
Estimated labor costs
- Typical labor time: about 0.5 to 1 hour per axle for a standard pad replacement
- Labor rate: roughly $75 to $150 per hour, depending on region and shop
- Possible extras: rotor inspection/resurfacing or replacement, hardware replacement, brake fluid flush if needed
Rotors or wear sensors can raise the total cost, so factor potential extra costs into your estimate when planning a service.
Where to buy and how to save
Smart shopping can yield savings while still ensuring quality and safety. Consider these practical approaches.
Shopping tips
- Compare prices across online retailers, local auto parts stores, and dealership parts departments
- Balance cost with warranty and compatibility; OEM parts fit and perform to factory specs
- Look for pad kits that include necessary hardware to avoid additional purchases
- Watch for coupons, promotions, and bulk or bundle deals
With careful comparison, you can secure reliable pads at a reasonable price and avoid surprises during installation.
Summary
For a 2007 Honda CR‑V, brake pad costs generally fall in the $25–$120 per axle range, influenced by material quality, whether the pads are for the front or rear, and where you buy them. Labor adds to the total if you hire a shop, typically $75–$150 per hour with about 0.5–1 hour per axle for the replacement. When budgeting, consider not just the pad price but potential rotor service, hardware, and fluids, and shop around for warranties and fitment guarantees. A bit of price comparison now can pay off in safer braking and fewer surprises later.