The 2016 Ford Super Duty with the 6.7-liter Power Stroke diesel holds about 15 quarts of engine oil when performing a full change with a new filter, roughly 14.2 liters.
In practical terms, this capacity applies to the common 6.7L Power Stroke used in the F-250 and F-350 of that model year. The figure covers oil needed to fill the engine with a fresh filter; actual amounts can vary slightly if the oil is drained to different levels or if filter capacity differs slightly.
Oil capacity at a glance
To provide a quick reference, here is the key figure for the 6.7L Power Stroke used by 2016 models:
- Engine oil capacity (with filter): 15 quarts (14.2 liters).
In practice, owners should aim for that target during a full oil change and recheck the level on the dipstick after refilling.
Maintenance considerations
Diesel engines, especially turbocharged designs like the 6.7L Power Stroke, rely on a consistent oil schedule. Using the correct viscosity and API specification (CK-4 or newer) helps maintain performance and longevity.
Practical steps for an oil change
Before performing an oil change, prepare the right tools and the correct oil specification. The following steps outline a typical process for the 6.7L Power Stroke in 2016 models:
- Position the vehicle on level ground and warm the engine to operating temperature to ensure complete draining of used oil.
- Drain the old oil and remove the old filter; dispose of used oil responsibly.
- Install a new oil filter and pour in the total volume of 15 quarts (14.2 liters) of engine oil, using the recommended grade for diesel engines.
- Start the engine, run for a few minutes, then stop and recheck the oil level; add oil as needed to reach the full mark on the dipstick.
Following these steps helps ensure the engine remains properly lubricated and within spec. Always consult the owner’s manual for any model-specific notes or changes in recommended oil grade.
Conclusion and takeaway
For the 2016 Ford F-250/F-350 with the 6.7L Power Stroke diesel, plan for about 15 quarts of engine oil during a full oil change with a new filter. Use diesel-grade oil meeting current API specifications, and verify the level after refilling to the full mark.
Summary
Final answer: The 2016 6.7L Power Stroke diesel holds roughly 15 quarts (14.2 L) of engine oil when performing a standard full oil change with a new filter. This figure guides maintenance planning and ensures proper lubrication for Ford's heavy‑duty diesel lineup.