The wheel lug nuts on a 2007 Honda Fit are M12 x 1.5 threads with a 60-degree conical (tapered) seat. A standard 19 mm socket fits the nuts, and the wheels use a 4x100 mm bolt pattern. Typical tightening torque is about 80 ft-lbs (108 Nm).
Key lug nut specifications
Below are the essential specs you need when servicing or replacing lug nuts on this model.
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (tapered)
- Hex/socket size: 19 mm (socket fits the lug nuts)
- Bolt pattern: 4x100 mm
- Recommended torque: ~80 ft-lbs (108 Nm)
With the correct specifications, you can safely install or remove the wheel hardware and maintain proper wheel retention.
Practical considerations when replacing wheels
Before purchasing replacement lug nuts or wheels, verify these details to ensure compatibility with your 2007 Fit.
- Confirm the vehicle uses four lug studs per wheel and a 4x100 mm bolt pattern.
- Verify thread pitch is M12 x 1.5 and that the lug nuts are appropriate for a 60-degree conical seat.
- Use a 19 mm socket to tighten or loosen the lug nuts.
- Tighten lug nuts to the specified torque (around 80 ft-lbs / 108 Nm) in a star pattern if applicable.
- Inspect lug nuts for wear or damage and replace any that are stripped or compromised.
Following these steps helps ensure a secure and durable wheel installation.
Summary: For a 2007 Honda Fit, expect M12 x 1.5 lug nuts with a 60-degree conical seat, a 4x100 mm bolt pattern, a 19 mm wrench/socket size, and a tightening torque around 80 ft-lbs (108 Nm).
Is 7/8 socket the same as 22mm?
A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
What size of socket for to remove lug nuts Honda?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| CR-V | 1997-2020 | 19 mm |
| Pilot | 2003-2020 | 21 mm |
| Odyssey | 2003-2020 | 21 mm |
| Ridgeline | 2006-2020 | 21 mm |
What size are the lug nuts on a 2007 Honda Fit?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (sold by each) (Part No. 611-182)
What size are the lug nuts on a Honda Fit?
12mm x 1.5
In conclusion, knowing the correct lug nut size, socket size, and torque specifications for your Honda Fit is crucial for proper wheel installation and maintenance. Using the factory-recommended 12mm x 1.5 lug nuts, a 19mm socket, and applying 80 ft-lbs (108 N-m) of torque will ensure a secure and safe fitment.