Replacing the rear wiper blade on a 2018 Murano is a quick, do‑it‑yourself task that can be completed in about five minutes. The key is using the correct blade length and securely locking the new blade onto the wiper arm before testing it on the glass.
In this guide, you’ll learn how to identify the right blade length for the Murano, gather the right replacement, and perform a step‑by‑step removal and installation. The steps are designed to be simple and safe, without requiring special tools.
What you’ll need
Before you start, assemble the items below so you have everything on hand during the replacement process.
- 11-inch rear wiper blade compatible with the 2018 Nissan Murano (check exact length on your replacement package)
- Microfiber cloth for cleaning the wiper arm and glass
- Glass cleaner (optional, for a clean mounting surface)
- Gloves or a wipe to protect your hands (optional)
Having the correct blade length and a clean mounting surface helps ensure a secure fit and a streak‑free sweep after installation.
Steps to replace the rear wiper blade
Follow these steps in order to safely remove the old blade and install the new one.
- Turn the ignition off and gently lift the rear wiper arm away from the rear window until it rests at a comfortable angle.
- Locate the blade’s release mechanism on the wiper blade assembly. On most Murano blades, you’ll press a small tab or squeeze the sides of the blade housing to release it from the wiper arm.
- With the release engaged, slide the old blade off the wiper arm’s connector. Be mindful that the arm is under slight tension and could spring back toward the glass.
- Compare the new blade to the old one to confirm correct length and connector type. Remove any protective covers from the new blade if present.
- Attach the new blade to the wiper arm by guiding the connector into the arm’s hook or pin until it clicks securely in place. Give the blade a light tug to ensure it is locked.
- Lower the wiper arm back onto the rear window and test the blade with the rear wiper to confirm smooth operation and full clearance.
If the blade doesn’t seat properly or you hear unusual resistance, recheck the connector type and length, then try again. Do not force the blade or risk damaging the arm or glass.
Tips and troubleshooting
These quick tips help address common issues that can come up during replacement.
- Ensure you have the correct blade length and connector type for your 2018 Murano. If in doubt, check the owner’s manual or ask at a parts counter.
- Keep the wiper arm away from the glass while removing and installing to prevent scratches or cracks.
- Clean the wiper arm’s connector and the blade’s contact area before installation for a secure fit.
- Test the blade after installation with the rear wiper and, if available, a quick spray of washer fluid to verify full coverage and no streaks.
A properly installed rear wiper blade should sit flush on the window, wipe cleanly, and remain securely attached through cycles of use.
Summary
Changing the rear wiper blade on a 2018 Nissan Murano is a straightforward maintenance task. Gather an 11-inch replacement blade, a cloth for cleaning, and a splash of glass cleaner if needed. Follow the safe removal steps, attach the new blade securely, and test the operation to ensure a clean, streak-free wipe. Regularly replacing a worn blade helps maintain visibility and driver safety in adverse weather.
How to change the wiper on a Nissan Murano?
So all we're going to do is hook it to our new blade you can see this thing rotates. And really we just need it on the curved. Part. So we'll flip it around.
How to remove rear Nissan wiper blades?
Side. Just like that so you're just prying it down just let that down slowly take the new wiper blade. And just snap it in place and place it. Down.
What size rear wiper blades for 2018 Nissan Murano?
12"
AUTOBOO 26"+18" Windshield Wipers with 12" Rear Wiper Blade Replacement for Nissan Murano Infiniti QX50 Acura RDX 2017 2018 2019 2020 2021 2022 2023-Original Factory Quality (Pack of 3)
How to change the rear wiper on a 2018 Nissan Murano?
Up this way and then the blade just swing it out thankfully it's only 12 inches so it's not too long you can easily do that pull up. And then just pull it out.