What size are the lug nuts on a Honda City 2014?

The lug nuts are typically M12 x 1.5 with a 60-degree conical (tapered) seating, and a 19 mm wrench is standard for tightening. There are four lug nuts per wheel, and the common wheel bolt pattern for this model is 4x100 mm.

The Honda City 2014 lineup covers several regional markets, so there can be minor variations based on trim, wheels, and aftermarket components. This article outlines the standard configuration found on many 2014 City models and notes where differences may occur.

Core lug nut specifications

Below are the standard details you’re likely to encounter on a typical 2014 Honda City configuration.

• Thread size: M12 x 1.5


• Seat type: 60-degree conical (tapered) seat


• Across-flats (wrench) size: 19 mm


• Number of lug nuts per wheel: 4


• Common bolt pattern: 4x100 mm

These specifications cover the majority of 2014 City models in common markets. Always verify with your vehicle’s manual or a parts diagram for your exact VIN, especially if you’re sourcing aftermarket wheels or rotating to different tire/work components.

Market variations and verification

In some regions, there may be slight deviations in nut size or seat design due to regional wheel suppliers or optional equipment. If you have aftermarket wheels, a locking lug set, or a different trim level, double-check the exact nut dimensions and secure fit before purchase or installation.

Summary

For a typical 2014 Honda City, expect four lug nuts per wheel, each with M12 x 1.5 threads and a 60-degree conical seat, tightened with a 19 mm wrench. Always confirm the exact specifications for your specific vehicle configuration by consulting the owner’s manual, dealer parts diagram, or stamped markings on your wheel studs.

Are all lug nuts 21mm?

The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size are the lug nuts on a 2014 Honda?

Dorman – Wheel Lug Nut: M12-1.50 Thread, Radius, Acorn, 1.161" Length, Chrome (sold by each) (Part No. 611-201)

What size of socket for to remove lug nuts Honda?

What Size Honda Lug Nuts Do I Need?

What size are the lug nuts on a Honda City?

Wheel Lug Nuts Size M12x1. 5 – Compatible for Honda variant models Honda City/Civic/CRV/Amaze/Accord/Jazz WRV/Elevate/Brio and Mobilio (Pack of 20).