Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How many quarts does a 2004 Honda Accord 2.4 take?

The engine oil capacity is 4.5 quarts with a new filter (about 4.3 liters).


For the 2004 Honda Accord with the 2.4-liter inline-four, the standard practice during an oil change is to replace the filter and fill to 4.5 quarts. Some guides note 4.0 quarts if the filter isn’t changed, but Honda’s service data and common maintenance guidance consistently cite 4.5 quarts with a new filter as the baseline. Always verify with the dipstick after pouring to reach the full mark.


Official oil capacity for the 2004 Honda Accord 2.4L


Before listing the figures, note how the total capacity is described relative to whether the filter is replaced during the service. The standard figure reflects a full change with a new filter; deviations occur if the filter isn’t replaced.



  • 4.5 quarts (4.3 liters) with the oil filter replaced.

  • 4.0 quarts (3.8 liters) if you do not replace the oil filter or for certain non-standard service scenarios.


In practice, start with 4.5 quarts after an oil change with a new filter, then check the dipstick and add small amounts as needed to reach the full line.


How to fill and check the oil level


Follow these steps to correctly fill and verify the oil level after an oil change.



  1. Park on a level surface and turn off the engine; wait about 5–10 minutes for the oil to settle.

  2. Open the hood and locate the engine oil dipstick; remove it, wipe clean, reinsert, and pull out to check the current level.

  3. If the oil level is below the “Full” mark, add oil in small increments—usually 1/4 quart (1 cup) at a time.

  4. Reinsert the dipstick after each addition to confirm the level; stop when the indicator shows near the full mark.

  5. Check for leaks and, if possible, run the engine briefly and recheck the level after it settles.


After completing the process, recheck the dipstick once more after the engine has cooled to ensure the level remains in the correct range.


Oil grade and other considerations


Most 2004 Accord 2.4L engines use 5W-20 as the recommended viscosity, though some climates or maintenance scenarios may allow 5W-30. Always follow the specification printed on the engine oil cap or in the owner's manual for your exact vehicle, and use a quality oil filter when performing changes.


Summary


For a 2004 Honda Accord with the 2.4L engine, the typical oil capacity is 4.5 quarts with a new filter. Always verify the level with the dipstick after filling and use the viscosity recommended in your owner's manual. Regular oil changes help sustain engine performance and longevity.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.