In short, there isn’t a single oil filter part number for all 2017 Outlanders; the correct part depends on the engine and market. For the gasoline models, use the 2.4-liter engine’s filter, while the Outlander PHEV uses a different filter. The exact number can be confirmed by checking the vehicle’s VIN or consulting Mitsubishi’s official parts catalog or your local dealer.
Understand the 2017 Outlander configurations
Across markets, Mitsubishi offered at least two primary configurations for the 2017 Outlander: a gasoline-only version powered by a 2.4-liter engine and the Outlander PHEV, which pairs a 2.0-liter petrol engine with electric motors. These configurations use different oil filters, and the part numbers reflect the different engines and service catalogs.
Gasoline-only Outlander: 2.4-liter engine
The 2.4-liter gasoline Outlander uses an oil filter that is listed under the 4B12 engine family in Mitsubishi’s parts catalogs. The official part number for this filter varies by market and production date, so the exact code must be verified for your vehicle.
Before using a list, the appropriate filter should be identified through approved sources to avoid mismatches in thread size, gasket diameter, and filtration capacity.
To help you determine the precise part number for the gasoline variant, consider these steps:
- Identify the exact engine code (for example, 4B12) and your market region, since parts catalogs differ by country.
- Locate your vehicle’s VIN and use it to pull up the OEM parts listing from Mitsubishi’s official parts catalog or the dealer's system.
- Consult your owner’s manual or service manual; the maintenance section often lists the correct oil filter part numbers for scheduled service.
- When in doubt, contact a Mitsubishi dealer’s parts department or a trusted automotive parts retailer with your VIN to confirm the correct filter.
Using the right oil filter protects engine oil pressure and filtration performance, while the wrong part can cause leaks or improper fit. Verify before purchasing.
Outlander PHEV: plug-in hybrid configuration
The 2017 Outlander PHEV uses a different engine setup and charging system, which can entail a separate oil filter specification from the gasoline version. The exact part number will be listed in the PHEV’s service catalog and is best verified with your VIN or by checking Mitsubishi’s official parts database.
To verify the PHEV oil filter part number, follow these steps:
- Check the VIN for the Outlander PHEV model and confirm the drivetrain designation in the catalog.
- Use the official Mitsubishi parts catalog or contact the dealer with your VIN to retrieve the precise oil filter code.
- Review the PHEV owner’s or service manual for the recommended filter model and cross-reference information.
- If sourcing from third-party retailers, cross-check the listed part number with the OEM specification to ensure proper fitment.
Accurate identification helps prevent installation issues and ensures the engine receives the correct filtration capacity and seal dimensions.
Where to buy and how to verify
When shopping for an oil filter, the safest route is to use the official Mitsubishi parts catalog or to call a local dealership with your VIN. Online parts retailers often offer cross-reference filters, but verify the exact part number against the OEM listing. Consider carrying the VIN, engine code, and market region when contacting suppliers to speed up the lookup.
Summary
The 2017 Mitsubishi Outlander does not have a single universal oil filter part number. The correct filter depends on whether the vehicle is gasoline-only (2.4-liter engine) or a PHEV variant, and the market in which the vehicle was sold. Identify the engine type, use the VIN to lookup the exact OEM part number in Mitsubishi’s catalog or through a dealer, and verify with the retailer before purchasing. This approach ensures you get the proper filter size, thread pitch, and gasket fit for your Outlander.