The 2.5 L Nissan Rogue typically takes about 4.8 quarts (roughly 4.6 liters) of engine oil when performing a full change with a new filter. This is the standard capacity you’ll see in most manuals for Rogue models using the 2.5 L engine, but always verify for your exact year and trim.
Official capacity for the 2.5 L Rogue
Engine oil capacity is published as the total volume the engine can hold, including the filter. For the Rogue’s 2.5 L engine, that figure is typically 4.8 quarts (4.6 liters).
- 4.8 quarts (4.6 liters) of engine oil with a new filter for a complete change.
Note: Some sources may list slight variations by model year or update. Always verify with your owner's manual or Nissan service portal using your VIN to ensure you have the precise specification for your vehicle.
Guidance for a precise fill
When performing an oil change, it's best to fill gradually and check the dipstick with the engine off and on level ground. Start the engine, let it run briefly, turn it off for a moment, then recheck the level and add oil in small increments until it reaches the full mark.
Summary
The 2.5 L Nissan Rogue typically requires about 4.8 quarts (4.6 liters) of engine oil for a full change with a new filter. Confirm the exact figure for your model year in the owner's manual, and always use the dipstick as the final check to reach the correct level.