The 2013 Chrysler 300 with the 3.6-liter V6 (Pentastar) typically uses 5W-20 synthetic or synthetic-blend oil that meets API SN and ILSAC GF-5, with about 6 quarts of oil including the filter. Always verify the exact specification in your owner's manual for your climate and driving conditions.
Engine context and oil requirements
The 2013 Chrysler 300 V6 relies on the 3.6L Pentastar engine. For this model year, the manufacturer generally recommends a light-viscosity oil to balance performance and efficiency. The standard viscosity is 5W-20, and the oil should be a synthetic or synthetic-blend that meets API SN or newer and ILSAC GF-5 certification. The typical total oil capacity is roughly six quarts when you include the filter. Always confirm the precise specification in your vehicle’s manual, as variations can occur based on climate or driving conditions.
Core oil specification and capacity
Before selecting oil, note the key requirements below. The list summarizes the official viscosity, certification, and capacity guidelines for the 2013 3.6L Pentastar V6.
- 5W-20 viscosity, synthetic or synthetic-blend oil
- Oil must meet API SN or newer and ILSAC GF-5 (GF-6 compatibility is commonly acceptable, but verify for your vehicle)
- Approximate oil capacity: about 6 quarts with a filter
- Applicable to: 3.6L Pentastar V6 in the 2013 Chrysler 300; similarly powered FCA models from the era
Conclusion: Using the specified viscosity and certification helps ensure proper lubrication and engine protection. Choose a reputable brand and replace the oil filter during changes.
Practical considerations for maintenance
While 5W-20 is the standard recommendation, climate and driving style can influence an exact choice. If you operate in extreme heat, carry out short trips frequently, or have a dealer advise a different specification for your region, consult the owner's manual or a service professional. Synthetic oils generally provide superior protection and can support longer intervals between changes, as long as they meet the required specs.
Summary
For a 2013 Chrysler 300 V6, use 5W-20 synthetic or synthetic-blend oil meeting API SN and ILSAC GF-5, with an oil capacity of approximately 6 quarts (including the filter). Always verify the exact viscosity and capacity in your owner's manual and choose a high-quality oil and filter to maintain engine performance and longevity.