A starter replacement for a 1995 Honda Accord typically costs between about $60 and $350 for the part itself, with total job costs usually in the range of $160 to $600 when labor is included. The exact price depends on the chosen part type (new OEM, remanufactured, aftermarket, or used) and the local labor rates.
To understand the question more fully, this article examines the different starter options, where to buy them, and how installation costs can affect the final price. The 1995 Accord came with several engine options, but the process and part fitment for the starter are generally consistent within the era’s four-cylinder models and typical V6 configurations.
Starter options and price ranges
Prices vary by source and part type. The following options cover the most common choices buyers encounter.
- New aftermarket starter: typically $60–$140. These are brand-new units not labeled OEM, but designed to fit Hondas of that era. Expect a modest warranty and possible core charges depending on the seller.
- Remanufactured OEM starter: typically $110–$180. Rebuilt to OEM specifications, often with a warranty, and usually a smaller risk of fitment issues than some aftermarket units.
- OEM new from a dealer: typically $180–$320. Genuine Honda components with manufacturer-backed warranties, but at a premium price.
- Used or salvaged starter: typically $40–$100. A budget option from a junkyard or rebuilt-equipment supplier; higher risk of wear and shorter remaining life, but cheapest upfront.
Note: Many sellers apply a core charge when you purchase a starter, typically refunded when you return the old starter. Availability and prices can vary by region and by engine variant (4-cylinder vs. V6) within the 1995 Accord lineup.
Labor and installation considerations
Beyond the price of the part, labor costs significantly influence the final bill. Here are common expectations for installation.
- Labor cost ranges: roughly $80–$250 at independent shops; $150–$350 at some dealerships, depending on local rates and whether the starter replacement is performed during a maintenance visit.
- Time to complete: typically 1–2 hours for a straightforward starter swap, more if the vehicle is difficult to access or other issues are found.
- DIY savings: if you have basic mechanical skills and the right tools, you can save labor costs, but consider the risk of incorrect wiring or bolt torque on electronics-heavy components.
When planning installation, confirm whether your shop will reuse or replace related hardware (bolts, wiring, mounting bracket), and inquire about warranty coverage on both parts and labor.
Where to buy and how to choose
Shopping considerations can influence both price and reliability. Here are common avenues and what to expect from each.
- Auto parts retailers (in-store or online): broad range of prices; easy returns; good for aftermarket and remanufactured options.
- Dealer network: best for OEM-new units and accurate fitment; higher prices but strong warranty support.
- Salvage yards or used-parts vendors: lowest upfront cost; variable condition and unknown remaining life; check reliability and get a tested unit if possible.
Always verify compatibility with your specific engine variant (the 1995 Accord used a few four-cylinder configurations) and ask about warranty terms and core charges before purchasing.
Summary
For a 1995 Honda Accord, expect the starter part itself to cost roughly $60–$320 depending on whether you choose aftermarket, remanufactured OEM, OEM-new, or used options. When you add labor, total installed prices typically range from about $160 to $600, influenced by local labor rates and the chosen part. Shop around, confirm compatibility, inquire about core charges and warranties, and decide whether you prioritize cost, reliability, or dealer-level OEM assurance.