0W-20 synthetic motor oil is used in the 2013 Acura ILX.
The 2013 ILX was offered with two engine options—the 2.0-liter i-VTEC and the 2.4-liter i-VTEC—and Acura specifies 0W-20 synthetic motor oil as the recommended viscosity for both engines. Use a Honda/Acura-approved synthetic that meets ILSAC standards. Oil capacity and service intervals vary by engine and driving conditions, so consult the owner's manual or the under-hood label for your exact figures.
Engine options in the 2013 ILX
The ILX lineup for 2013 included two engine choices. Knowing which one you have helps with maintenance, but the oil specification remains consistent across variants.
- 2.0-liter i-VTEC inline-4 (base engine)
- 2.4-liter i-VTEC inline-4 (available on higher trims)
Regardless of engine, 0W-20 synthetic is the standard recommendation. Always verify the exact capacity and oil requirements for your specific model in the owner's manual or on the oil filler cap.
Oil change intervals and checks
With synthetic 0W-20, many ILX owners can follow longer change intervals under normal driving, but severe conditions (extreme heat, heavy city driving, or short trips) may warrant more frequent changes. Always follow the schedule in the owner's manual and use the correct oil type for your climate and driving habits.
Oil specification and service details
Key oil specifications for the 2013 ILX include viscosity, synthetic formulation, and industry standards. Acura emphasizes using a full-synthetic 0W-20 that meets ILSAC GF-5 (and newer iterations), with compatible API certifications. Use Honda/Acura-branded or equivalent oils rated for your climate and driving conditions.
- Viscosity: 0W-20 synthetic motor oil
- Standards: ILSAC GF-5 (and newer GF-6) and API SN/Resource; Honda/Acura-approved synthetic recommended
- Oil capacity: varies by engine; roughly 4.2–4.5 quarts with filter; check manual for exact figure
Always perform oil changes at the recommended intervals and use the correct oil type for your engine and climate. The filler cap and owner's manual are authoritative sources for confirmation.
Summary
The 2013 Acura ILX uses 0W-20 synthetic motor oil as the standard specification for both available engines. Use a Honda/Acura-approved synthetic that meets ILSAC standards, and refer to your owner's manual for the exact capacity and change interval based on your engine and climate.
What kind of oil does a 2013 Acura Ilx take?
5Qts Genuine Acura Full Synthetic Engine Oil 0w20. 2013-2022 Acura ILX 2.4L L4.
Why does Acura use 0W-20 oil?
0W-20 synthetic oil is thinner and more fluid than higher weight motor oil, which means that it can flow more easily through your engine. This allows for better lubrication and reduces friction between moving parts, which can help prolong the life of your engine.
What type of oil does a 2013 Acura take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 3.7 quarts. w/of. After refill check oil level. |
| Capacity: | 3.9 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
How much oil does a 2013 Acura ILX 1.5 take?
Maintenance Information
This kit is built specifically for your 2013 Acura ILX 1.5L. Engine oil capacity is approximately 3.75 quarts.