The 2008 Honda Odyssey with the 3.5-liter V6 uses Honda's standard oil filter: 15410-PLM-A01. This is the OEM filter most owners will replace with.
In this article, we identify the exact part, explain how to verify it for your VIN, and describe how to choose a trustworthy replacement. We also outline steps for a DIY oil change and tips to avoid common mistakes when selecting an oil filter for this model.
Identifying the right filter
The 3.5L V6 engine in the 2008 Odyssey requires the Honda oil filter part number 15410-PLM-A01 in most catalogs. Always verify with your VIN or the owner's manual if you want absolute certainty for your particular build date.
To verify the exact filter for your vehicle, you can reference one of the following methods:
- Check the owner's manual under the maintenance section for the recommended oil filter part number for the 3.5L V6 engine.
- Inspect the filter you remove during an oil change and compare the part number to 15410-PLM-A01; note the manufacturer’s name on the filter can as well.
- Provide your VIN or engine code (J35) to a Honda dealer or trusted auto parts retailer to confirm the exact replacement part for your vehicle's build date.
Using the correct filter ensures proper fitment and filtration for your engine's oil change interval.
What to consider when buying replacement filters
When shopping for an oil filter for the 2008 Odyssey, keep these considerations in mind:
- Ensure the filter is designed for a 3.5L V6 engine and cross-referenced to Honda's part number 15410-PLM-A01.
- Verify the gasket size and thread pattern match your oil filter housing.
- Choose a filter from a reputable brand with a good fit and filtration efficiency for the expected oil change interval.
- Be mindful of your local oil grade recommendation (often 5W-20 in U.S. models) and ensure the filter supports the lubrication plan.
Bottom line: the correct filter for the 2008 Odyssey is Honda 15410-PLM-A01, with aftermarket options available that meet the same specifications. Always verify with a reliable parts source for your specific VIN.
Summary
The 2008 Honda Odyssey's oil filter is the Honda OEM part 15410-PLM-A01 for the 3.5L V6 engine. Confirm with your VIN/manual and, if using aftermarket parts, ensure compatibility with the engine and oil specification to maintain proper filtration and engine health.
Where's the oil filter on a 2008 Honda Odyssey?
And you just need to break. It. We're going to set up the tray. Below.
What type of oil does a 2008 Honda Odyssey van take?
Oil Grade: API*
| Viscosity: | 0W-20, 5W-20 (All TEMPS) - 5W-20 can be used if requested. |
|---|---|
| Capacity: | 4.2 quarts. W/O FLT, w/of. After refill check oil level. |
| Capacity: | 4.5 quarts (with filter). W/ FLT. After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) |
What oil filter does a Honda Odyssey use?
Honda Genuine engine Oil Filter / Same as 15400-RTA-003.
What oil filter do I need for a 2008 Honda Odyssey?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.