The ground clearance for most 2016 Honda Pilot models is about 7.3 inches (roughly 186 millimeters). Note that this figure can vary slightly by trim level and wheel/tire configuration, so your exact measurement may differ by a hair.
Ground clearance is the vertical distance between the road surface and the lowest point of the vehicle's undercarriage. For the Pilot, that height influences highway ride comfort, ramp clearance, and light off-road ability, and it sits in the mid-range for midsize SUVs. The 2016 Pilot's stance reflects its design as a family-hauler with crossover underpinnings rather than a rugged off-roader.
Official figures and typical ranges
Manufacturers publish a single curb-to-ground clearance figure, which for the 2016 Pilot is commonly cited as around 7.3 inches. Some sources may show a slightly lower figure, such as 7.2 inches, depending on the exact wheel and tire setup in a given vehicle.
Variations by trim and tires
Although the overall ride height is broadly similar across trims, wheel size, tire profile, and any aftermarket upgrades can nudge the measured ground clearance by a small amount. If your Pilot has larger wheels or a different tire package, expect a small variance from the nominal value.
How to verify the exact clearance on your vehicle
To confirm the precise clearance on your own 2016 Pilot, use a straightforward measurement on a level surface: park the vehicle, switch off the engine, and measure from the ground to the lowest point of the undercarriage or bumper using a ruler or tape measure. You can also consult the owner's manual or the tire/wheel specification for your specific build, or contact a Honda dealer for the exact figure for your VIN.
Summary
In most cases, the 2016 Honda Pilot offers roughly 7.3 inches (about 186 mm) of ground clearance, with minor variations by trim and tire choice. For everyday driving, this provides comfortable highway performance with adequate clearance for light off-road use; for exact measurements on a particular vehicle, check the spec label or measure directly.