For the 2025 Honda Odyssey, use a cartridge-style oil filter designed for the 3.5L V6 engine (Honda’s J35 family). Opt for Honda Genuine Oil Filter or a reputable aftermarket filter that explicitly lists compatibility with the Odyssey 3.5L V6. The filter element sits inside a housing and is replaced during an oil change, not a traditional spin-on canister.
Filter type and housing
The Odyssey’s 3.5L V6 uses a cartridge-style oil filter housed in a small canister. To service it, you remove the housing cap, replace the internal cartridge, install a new O-ring, and reseal the housing. This design differs from older spin-on filters and requires using the correct filter element and seals for a proper seal and filtration.
Always verify the exact filter and housing design for your specific VIN to ensure proper fitment and reliability.
Choosing the right oil filter
Selecting the correct filter for the Honda Odyssey 3.5L V6 ensures proper filtration and engine protection. The following options are commonly used and compatible when properly matched to the 3.5L Odyssey:
- Honda Genuine Oil Filter (OEM) — guaranteed fit and performance for the Odyssey 3.5L V6
- Bosch Premium FILTECH oil filter — reputable aftermarket option listed as compatible with many Honda models
- MANN-FILTER — well-regarded aftermarket option compatible with the Odyssey 3.5L V6
- WIX — widely used aftermarket filter with models stated to fit Honda 3.5L V6 engines
When shopping, look for a filter that explicitly lists compatibility with the Odyssey’s 3.5L V6 and the 2025 model year. If in doubt, cross-check with the retailer using your VIN or consult your dealer.
Oil grade, capacity, and service interval
The 2025 Odyssey generally requires 0W-20 synthetic oil for normal driving. Always confirm the exact specification in your owner's manual or under-hood sticker for your climate and trim. The oil capacity with a new filter is about 4.7 quarts (roughly 4.5 liters), though exact figures can vary by year and engine variant; consult the manual for the precise amount.
VIN verification and where to buy
To ensure you purchase the correct filter, use your vehicle’s VIN when consulting OEM or aftermarket parts catalogs. Enter the VIN on Honda’s parts lookup or trusted retailers to retrieve the exact filter part number and fitment for your Odyssey. If you’re unsure, your dealership or a qualified parts professional can confirm the right filter for your specific vehicle.
Practical service steps for Odyssey oil filter replacement
Before performing the replacement, gather the necessary tools and supplies, and follow year-specific guidance as needed. The following steps provide a general approach for the cartridge-style filter used on the Odyssey.
- Prepare: warm up the engine, place the vehicle on a level surface, and gather an oil drain pan, new oil, new filter element, and the appropriate O-rings
- Drain old oil: remove the drain plug and allow the used oil to drain completely
- Access the filter housing: remove the housing cap to expose the internal cartridge
- Replace the cartridge: remove the old filter element, install the new cartridge, and lubricate the new O-rings with a bit of fresh oil
- Reassemble and refill: reinstall the housing cap, refill with the recommended oil amount, and check for leaks
Note: The exact steps can vary by year and engine code. Always consult the service manual or dealer for model-specific instructions for your Odyssey.
Summary
For the 2025 Honda Odyssey, use a cartridge-style oil filter compatible with the 3.5L V6 engine, with Honda Genuine OEM or a trusted aftermarket option. The filter sits in a housing and should be replaced along with the oil change. Use 0W-20 synthetic oil and verify the exact oil capacity and specification in the owner's manual. Confirm compatibility via VIN when purchasing parts, and follow model-specific service steps to ensure a proper seal and filtration. Regular oil and filter changes help maintain engine longevity.