The 2008 Honda Odyssey uses a 5-lug wheel pattern on a 114.3 mm bolt circle, commonly written as 5x114.3. This configuration is standard across the 2008 Odyssey lineup and is shared with several other Honda models of that era.
Understanding this pattern is essential when selecting replacement wheels or upgrading to aftermarket rims. Below is a detailed breakdown of what the bolt pattern means, how it affects compatibility, and what to check when shopping for wheels for this minivan.
Pattern details
The bolt pattern is described as 5 on 114.3 mm, meaning five wheel studs are positioned on a circle with a diameter of 114.3 millimeters (4.5 inches). This is the standard configuration for the 2008 Odyssey across its trims and is widely compatible with wheels from other vehicles that share the same pattern.
Practical implications
When purchasing wheels, look for labeling that confirms 5x114.3. Confirm the hub bore and wheel offset to ensure a proper fit and to avoid clearance or balancing issues. If the center bore of the new wheel is larger than the hub, you may need hub-centric rings to achieve proper alignment and reduce vibrations.
Compatibility considerations
Because wheel fitment can vary by trim and aftermarket options, always verify compatibility using your vehicle’s VIN, the wheel manufacturer’s specifications, or guidance from a trusted service provider. If you’re unsure, consult a professional to prevent installation problems or safety concerns.
Summary
For a 2008 Honda Odyssey, the bolt pattern is 5x114.3 (five lugs on a 114.3 mm circle). This information is key when selecting replacement wheels or aftermarket rims, and you should also confirm center bore and offset to ensure a proper fit.