In short: the 2020 Kia Soul with a 2.0-liter engine requires about 4.0 quarts (3.8 liters) of engine oil for a full drain-and-fill, including a new oil filter.
The 2.0L powerplant used in the Soul is a compact four-cylinder that shares its basic service specs with other Kia models from the same family. Oil capacity figures can vary slightly by market and by whether you’re replacing the filter, but the standard specification for a normal oil change is around four quarts. Always verify the exact specification in your owner’s manual or with a Kia dealer for your region.
Capacity specifics for the 2.0L engine
The official capacity, including a new filter, is 4.0 quarts (3.8 liters). This is the figure most service databases and Kia documentation cite for the 2020 Soul equipped with the 2.0L engine.
Practical tips for filling and checking
When doing an oil change, use the recommended viscosity (typically 5W-20 in most climates) and install a new filter. Pour in about 3.8 quarts, run the engine, let it settle, then recheck with the dipstick and add up to 4.0 quarts as needed to reach the full mark. Do not exceed the full level, and wait a few minutes after turning off the engine before checking to ensure an accurate reading.
Summary
The 2020 Kia Soul’s 2.0L engine takes roughly 4.0 quarts (3.8 liters) of oil with a new filter. Always confirm the exact amount for your specific vehicle and climate in the owner’s manual, and follow the dipstick reading to reach the proper full level. Using the correct grade and a clean filter helps maintain engine longevity.